On my 2007 TDV8 someone has upgraded the lights to LED lights. It is currently in for the MOT and the lights are flickering all over the place. I suspect a bad job at fitting them.
Can anybody tell me the solution? To me there is a resistance problem with the LED drawing less power than the tungsten causing the computer to go into melt down.
Thanks Current cars
Range Rover Sport HSE TDV8
Range Rover TDV8 Vogue
Range Rover P38 Vogue
Range Rover CSK
Discovery 3 HSE

You might need to turn off cold and hot monitoring on the bulbs you've changed. Got - 2017 SDV8 Autobiography in Loire Blue
Had- 2008 TDV8 Vogue SE in Java black
Had - 2007 S/C in Stornoway Grey

Is that a software issue?
Does it need plugged in to do that? Current cars
Range Rover Sport HSE TDV8
Range Rover TDV8 Vogue
Range Rover P38 Vogue
Range Rover CSK
Discovery 3 HSE

The IID tool can do it  Got - 2017 SDV8 Autobiography in Loire Blue
Had- 2008 TDV8 Vogue SE in Java black
Had - 2007 S/C in Stornoway Grey

£500 tool to possibly fix a bulb issue. Either get better quality LEDs or junk them and go back to filament bulbs.

It does a bit more than fixing bulb issues but you get what you pay for  Got - 2017 SDV8 Autobiography in Loire Blue
Had- 2008 TDV8 Vogue SE in Java black
Had - 2007 S/C in Stornoway Grey

hi,
can someone tell me where I can find the point in the menu of IID-tool "turn off cold and hot monitoring for the rear lights"
I only find it for the brake lights.

I think I cannot select or see the complete ccf list ..

many thanks