: https://www.fullfatrr.com/forum/topic44115.html


You should read the above post and you will see most of the common issues

Glad you are sorted so easily.
Mike. G reg 2.5VM Vogue Portofino red 1991- 1999
V reg 2.5td P38 Rioja red 1999- 2006
53 reg td6 Vogue Oslo blue 2006- 2015
11 reg 4.4 TdV8 Vogue SE. Baltic blue 2015- date.
https://www.fullfatrr.com/forum/topic56162...tty+affair

Read and completed.

Thanks

Neil

Great news
Don’t drive it too far or you risk DPF filling up too fast
Keep us posted  Gone to a good home: 2011 4.4 TDV8 Vogue SE Buckingham Blue with Ivory and clear glass = "Rory"
2025MY Defender D350 90 in Silicon Silver on coils
1974 Series 3 Lightweight = "Millie"
Many, many other Landies over the years
My preferred specialist: www.glenrands.co.uk
--------------------------------------------------

no quoted added....redone

Last edited by neilly on 5th Aug 2020 6:15pm. Edited 1 time in total

DrRob wrote:

Great news
Don’t drive it too far or you risk DPF filling up too fast
Keep us posted

double posted....oops

Neil,
Trust Rob, he is right.
Every time DPF warnings become a problem, they are caused by air leaks in the intake...the plenum hoses are the biggest cause, followed by leaks on the throttle body hose, then splits in the plastic manifolds or the plenum .

Get it changed before you fill the DPF.

You only have to read the catalogue of posts from previous failures to get the facts.

Mike. G reg 2.5VM Vogue Portofino red 1991- 1999
V reg 2.5td P38 Rioja red 1999- 2006
53 reg td6 Vogue Oslo blue 2006- 2015
11 reg 4.4 TdV8 Vogue SE. Baltic blue 2015- date.
https://www.fullfatrr.com/forum/topic56162...tty+affair

OK, good to know thanks,

It is still doing DPF burns on the GAP IID.

I will keep an eye on it. I did superglue the hole closed. So will see how it lasts over the next few days.

Thanks

Neil

Trust me. I'm a Dr
Looking forward to seeing your nice bright pink/yellow/green hoses in place  Gone to a good home: 2011 4.4 TDV8 Vogue SE Buckingham Blue with Ivory and clear glass = "Rory"
2025MY Defender D350 90 in Silicon Silver on coils
1974 Series 3 Lightweight = "Millie"
Many, many other Landies over the years
My preferred specialist: www.glenrands.co.uk
--------------------------------------------------

Haha, I ordered black.....

I only use coloured Silicone of the Defender..LOL

Thanks

DrRob wrote:

Trust me. I'm a Dr
Looking forward to seeing your nice bright pink/yellow/green hoses in place

Well that is annoying, order black and get blue.

So gave them a call and told the supplier I was using the parts but expect to be replacing them.

But got them fitted.

Biggest PITA was the connector shown here, not sure how that is meant to be removed, as I could not get it off.



Thanks again for all the help will have another go when the replacement black stuff turns up.

Shiny
I’ve got blue on my 200Tdi Classic
Did you cut to length or are they ready cut? Be good to post details for benefit of others in future  Gone to a good home: 2011 4.4 TDV8 Vogue SE Buckingham Blue with Ivory and clear glass = "Rory"
2025MY Defender D350 90 in Silicon Silver on coils
1974 Series 3 Lightweight = "Millie"
Many, many other Landies over the years
My preferred specialist: www.glenrands.co.uk
--------------------------------------------------

It came in a 950mm length,

Was the quickest way to get it next day from Amazon prime. From AutoSiliconehose.

Used a 3 inch glass cleaning blade to trim to length, one thig to make sure is not to make any longer than the original parts.

Be aware the inside of the plenum is a dirty place, so kae sure you have plenty of paper and brake cleaner to clean thign as you go.

The small male torx bolts that hold the front plate down can be undone with a 4mm 6 sided socket. If you do not have the correct torx fitting.

The 3 x 10mm headed bolts that hold the plenum chamber to the front plate , it is best to have 10mm ratchet spanner, this makes life slightly easier.

The bolts that hold you remove are slightly different lengths so take care of where they go.

If you use 70mm silicone pipe then a spray of a lube helps them sldie over the intakes, I used silicone spray as I had some in the garage.

BE VERY CARFUL with the the jubilees , the original ones have a flat plate on the screw area, if you releas e them too much this can fall off. There is a small risk of it going in the inlet manifold!!

Not a job that can be rushed, take your time, it took me 2 1/2 hours, cleaning as I went.

Thanks

DrRob wrote:

Shiny
I’ve got blue on my 200Tdi Classic
Did you cut to length or are they ready cut? Be good to post details for benefit of others in future

Great write up for future (Stan - maybe in Wiki ?)
Mine's Buckingham Blue  Gone to a good home: 2011 4.4 TDV8 Vogue SE Buckingham Blue with Ivory and clear glass = "Rory"
2025MY Defender D350 90 in Silicon Silver on coils
1974 Series 3 Lightweight = "Millie"
Many, many other Landies over the years
My preferred specialist: www.glenrands.co.uk
--------------------------------------------------