Full kit to attach to factory mounting points and plug and play, inc ball with key

£395 plus post

Click image to enlarge

Click image to enlarge

Click image to enlarge

Click image to enlarge

Click image to enlarge

Click image to enlarge

from what year car ? .
Experience is the only genuine knowledge, but as time passes, I have forgotten more than I can remember
Volvo V70 P2 2006 2.4 Petrol 170bhp Estate SE
MG Midget Mk1 1962

Previous: L322 Range Rover TDV8 3.6 2008; L322 Range Rover TD6 3.0 2002; P38A Range Rover V8 1999

2003 but fits any L322 One day your life will flash before your eyes......................................make sure yours is worth watching!

I thought the exhaust hangers were different on late cars?

Exactly what I'm looking for, but I don't want to have to faff about cutting and welding. 2010 4.4 TDV8 Vogue SE

They are indeed different. On the later cars, there is a small vertical piece near the front mounting hole to which the exhaust is bolted to (shown in the attached picture). You could make something to do the job easily enough with a piece of steel with a 90 degree bend with a couple of drilled holes if you wanted to use the early towbar on a later car.

You would think that a bent tab would just be bolted on using the mounting bolt but if anyone has a pic of what the tad does Ill weld a pair on that way it fits any year, does it have 1 or 2 holes etc or captive nuts etc One day your life will flash before your eyes......................................make sure yours is worth watching!

Just one hole, no captive nuts.

Maybe better if I just weld a tab on and leave the hole so it can be marked or do you think just drill 2 holes so the exhaust can be mounted in the best placed ones? One day your life will flash before your eyes......................................make sure yours is worth watching!

https://www.ebay.co.uk/itm/Range-Rover-L32...ition=3000

Take a look at these, not the clearest image but best I could find.

I dont need one but I'm tempted but it's a bit rich for me

Had this sold to GSXR Dave but due to circs beyond his control he had to pull out.
Just need this gone now, 2 keys and all wires/relays etc plug and play, I can weld the tabs on for later models no problem if required
Black Friday special

£250 One day your life will flash before your eyes......................................make sure yours is worth watching!

Yes very sorry again john bit of a stressful time at the moment and on top of all that I come out from my MRI spinal scan to find some dickhead has reversed into my off side rear light and smashed it.
Iv sent a message to someone on here selling one.

sorry to put another spanner in the works I don't think your electrics will work on the 2010/12 l322 as it has a single plug and no coding required?

Good point I only know it goes on the first facelift ones from 2006-10 but the body and all metal parts fit, ebay want £250 just for ball and holder so still a cheaper way around. One day your life will flash before your eyes......................................make sure yours is worth watching!