Home > Technical (L405) > SDV8 Gearbox issue (LR approved warranty declined claim) |
|
|
Glynn Member Since: 20 Sep 2013 Location: Lancs Posts: 64 |
Why are these gearboxes so problematic ? |
||
5th Apr 2019 8:08pm |
|
cadoganpier Member Since: 04 Sep 2017 Location: Berkshire Posts: 20 |
I have the same symptom when pulling out of left turns, a mild thump/clonk from the back of the car, like a sort of drive shaft clonk. Not always and not overly worrying but it's there never the less. |
||
20th Nov 2019 10:13am |
|
DrRob Member Since: 16 Apr 2015 Location: Petersfield, Hampshire Posts: 4302 |
Lots of places now can do a Megaflush Gone to a good home: 2011 4.4 TDV8 Vogue SE Buckingham Blue with Ivory and clear glass = "Rory"
|
||
20th Nov 2019 12:08pm |
|
Red Merle Member Since: 19 Sep 2016 Location: Cornwall Posts: 2158 |
I’m not sure that they are that problematic, it’s just that (like any car forum) this is a point for those that have had problems to gather. |
||
20th Nov 2019 6:53pm |
|
Red Merle Member Since: 19 Sep 2016 Location: Cornwall Posts: 2158 |
That’s a very large leap of logic. We don’t know nearly enough about what the problem is, or how helpful the dealer is being. We could just as easily say that it’s proof that, whenever two or more LR owners gather, they like nothing more than having a good grumble |
||
20th Nov 2019 7:49pm |
|
GraemeS Member Since: 06 Mar 2015 Location: Wagga area Posts: 2469 |
Any non-franchised LR workshop will be able to change the transfer case oil then initiate the transfer case clutch re-calibration. |
||
20th Nov 2019 10:29pm |
|
GGDR Member Since: 26 Nov 2016 Location: London Posts: 3542 |
Can the IIDTool do this re-calibration?
|
||
21st Nov 2019 8:29am |
|
GraemeS Member Since: 06 Mar 2015 Location: Wagga area Posts: 2469 |
Its a diagnostic tool function but I can't recall if the IIDTool has been programmed to do it for the L322 (pretty sure its available) and don't know for the L405. I'm reminded of my request to Gap to add it to the D4 menu as it was already provided for D3s. Also like the rear diff re-calibration which wasn't on the L322 menu but I would need if I retro-fitted an e-diff, which I subsequently did. |
||
21st Nov 2019 7:50pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis