Home > In Car Electronics (L405) > 360 camera module location help needed |
|
|
Charles89 Member Since: 11 Nov 2018 Location: Leicester Posts: 268 |
Bump |
||
25th Sep 2019 6:14am |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35267 |
is this any help charles,
|
||||
25th Sep 2019 7:52am |
|
Charles89 Member Since: 11 Nov 2018 Location: Leicester Posts: 268 |
Stan you sir are a gent!
|
||
25th Sep 2019 11:22am |
|
andygts Member Since: 16 May 2015 Location: Yorkshire Posts: 351 |
This may help, pdf of the fault from TOPIX
|
||
25th Sep 2019 1:04pm |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35267 |
nice one andy...looks like the module is in/on the door pillar.. ... - .- -.
|
||
25th Sep 2019 1:14pm |
|
Charles89 Member Since: 11 Nov 2018 Location: Leicester Posts: 268 |
Thank you both. Very very much appreciated. I now have all my cameras working again!
|
||
25th Sep 2019 6:31pm |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35267 |
good result ... - .- -.
|
||
25th Sep 2019 6:44pm |
|
andygts Member Since: 16 May 2015 Location: Yorkshire Posts: 351 |
I'd be going back into Land Rover and speaking to a manager armed with the Special Service Message Bulletin, it's a known fault hence the service bulletin, they should have gone straight for the module. It is not even model specific so the techs should have encountered this fault before. I'd be wanting some money back. Current
|
||
26th Sep 2019 10:14am |
|
tonypjr Member Since: 29 Oct 2019 Location: New Jersey Posts: 2 |
I haven't had this issue with my L405, but did have it with my L320. I ended up fixing it by unplugging all of the cameras at their individual locations, cleaning the plugs with isopropyl Alcohol Spray with a plastic bristle brush and putting a light dab of lithium grease. After that, I never experienced another Flicker or pink screen from any of the cameras. I think the connectors don't really seal very well especially in climates where we have snow and lots of water. Hope this helps. Free99 is always a good thing. |
||
29th Oct 2019 9:49pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis