Afternoon all - quick question, with these software tools you can buy (IID etc?) can you adjust the suspension height side to side? Both of my L322s have ben visibly lower on one side than the other, I asked about it with the last one and my local indy (who I rate very highly) said there was a 10mm difference "permitted" side to side.

I'd just like mine to look level when parked, and it doesn't always! 5.0 S/C Autobiography - now gone to pastures new....

Yes, but there is that 10mm tolerance that even the iiDTool may not be able to resolve, and of course it requires that everything to do with the EAS is working correctly.

On my TD6 my front left was always down 20mm when measured against the front right and nothing i did with AllComms or iiDTool could correct it .
Experience is the only genuine knowledge, but as time passes, I have forgotten more than I can remember
Volvo V70 P2 2006 2.4 Petrol 170bhp Estate SE
MG Midget Mk1 1962

Previous: L322 Range Rover TDV8 3.6 2008; L322 Range Rover TD6 3.0 2002; P38A Range Rover V8 1999

Yeah it's fine when driving, I just want it to be level when I'm looking at it! 5.0 S/C Autobiography - now gone to pastures new....

IID won't correct that. But dropping it to access mode will. if it's just to be aesthetically pleasing, then that will work. Tony
You're always in the ........it's just the depth that varies
2014 L494 5.0 S/C AB Silver
2014 L494 3.0 HSE in Chilli
2014 SL63 AMG White


Gone:
2011 5.0 L322 White (Stolen)
07 4.2 SC in silver.
06 4.2 SC in black RSE
RRS 4.2 SC in Black RSE
52 4.4 Vogue in silver
04 Mercedes CLK 320 Conv
03 4.0 V8 ES Disco in Silver
00 TD5 90 County
98 4.6 HSE in Epsom x3
97 3.9ES Disco
93 L 4.2 LSE in black
too many classics to mention !