This one on the bay: https://www.ebay.co.uk/itm/5-Step-Sequenti...:rk:7:pf:0

...is 5-steps.

We'd need 8 steps ideally. You could always combine a couple and use the 5-step I guess. Not great for the OCD.

Looking at this I think as per my last post it might be easier to take the original ribbon completely out and make up a new 'string' with new LEDs.

EDIT It's 12 LEDs like this:

Click image to enlarge

wow, you have been busy....why did LR make these lights so complicated

when you look at the light unit [fitted] you see 8 vertical rows so if using a five step module you could have a sequence of 3,2,1,1,1 maybe..

can the ribbon be spliced somehow greg?




@craig

I've counted seven rows Stan.... (I could be wrong).

Not sure I'd be confident slicing into the ribbon. No idea though.
But on a safety item I'd want a super sound connection.

With ribbon then LED and ribbon then LED etc etc you'd end up with so many slices I'm thinking better and more reliable to make up a new 'sting' with new cable and new LEDs.

. Cheers, Greg
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
2011 Vogue SE 4.4 with lots of toys in Stornaway

makes sense re a new ribbon/cable...


i guess we'll be both out tomorrow counting them leds...




craig mentioned that powerfuluk might be doing something. i wonder what that is, maybe a new ribbon thingy?

thinking that if the rear light unit does have 8 vertical leds then a 4 step module would be best [2,2,2,2]

https://www.ebay.co.uk/itm/2x-45cm-Car-LED...2443650408

Any good for what you are after lads? 2015 4.4 AB
GSXR 1000 K5
R1 1998

Nah John the strip won't work.
We'll need 12 individual LEDs made up to fit the housing positions..
. Cheers, Greg
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
2011 Vogue SE 4.4 with lots of toys in Stornaway

Last edited by GGDR on 2nd Dec 2018 12:41pm. Edited 1 time in total

Thats my best googling effort for nowt then !!!! 2015 4.4 AB
GSXR 1000 K5
R1 1998

Stan you're absolutely right it's eight. Missed than from the inside, maybe two under the IC

https://dictionary.cambridge.org/dictionar...n-t-fix-it
I think you lads must be bored, looking for your next project
Mike G reg 2.5VM Vogue Portofino red 1991- 1999
V reg 2.5td P38 Rioja red 1999- 2006
53 reg td6 Vogue Oslo blue 2006- 2015
11 reg 4.4 TdV8 Vogue SE. Baltic blue 2015- date.
https://www.fullfatrr.com/forum/topic56162...tty+affair

You say that Mike but here's a GIF mock up, might get you tempted?


. Cheers, Greg
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
2011 Vogue SE 4.4 with lots of toys in Stornaway

Spen King will be turning in his grave  G reg 2.5VM Vogue Portofino red 1991- 1999
V reg 2.5td P38 Rioja red 1999- 2006
53 reg td6 Vogue Oslo blue 2006- 2015
11 reg 4.4 TdV8 Vogue SE. Baltic blue 2015- date.
https://www.fullfatrr.com/forum/topic56162...tty+affair

They are a good find John and would work well with the earlier non led lights.  2007 Vogue TDV8 in Zermatt Silver with Charcoal

 2015 4.4 AB
GSXR 1000 K5
R1 1998

LEDs use a driver IC so cutting into the strip wont work unless the drivers are next to the LEDs. The LED strips that can be cut have their drivers adjacent to the LEDs using 12V+/- rails down each side.

Progressively lighting blinkers are unlikely to meet regulatory timing requirements when viewed from the extremities.