![]() | Home > Technical (L322) > TPMS reading too high |
![]() ![]() |
|
|
Sandyt Member Since: 07 Nov 2013 Location: Wraysbury Windsor Posts: 2279 ![]() ![]() ![]() |
Gents the TPMS on mine is reading the pressures on all tyres including the spare 20 psi higher than actual any way to recalibrate ?? |
||
![]() |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35650 ![]() ![]() |
pull the fuse or battery reset... ... - .- -.
|
||
![]() |
|
Sandyt Member Since: 07 Nov 2013 Location: Wraysbury Windsor Posts: 2279 ![]() ![]() ![]() |
Thanks Stan will have a go |
||
![]() |
|
Sandyt Member Since: 07 Nov 2013 Location: Wraysbury Windsor Posts: 2279 ![]() ![]() ![]() |
All sorted switched off with 11d tool then switched back on all good |
||
![]() |
|
Sandyt Member Since: 07 Nov 2013 Location: Wraysbury Windsor Posts: 2279 ![]() ![]() ![]() |
No can see the readings |
||
![]() |
|
Frans@Yamorna Member Since: 15 Apr 2017 Location: Tzaneen Posts: 147 ![]() ![]() ![]() |
Thanks!
|
||
![]() |
|
Sandyt Member Since: 07 Nov 2013 Location: Wraysbury Windsor Posts: 2279 ![]() ![]() ![]() |
No idea about the D4 but the system on the Fatty is all self learning and once synced you see readings of all 5 wheels if fitted |
||
![]() |
|
Frans@Yamorna Member Since: 15 Apr 2017 Location: Tzaneen Posts: 147 ![]() ![]() ![]() |
Hi do you mean you can actually see the pressure readings?If so can you pass the setting as per your iid tool?My Fattie has TPMS and it alerts when there is a problem but can not see the pressures!Would like to see that if possible.
|
||
![]() |
|
Sandyt Member Since: 07 Nov 2013 Location: Wraysbury Windsor Posts: 2279 ![]() ![]() ![]() |
Can only see the pressure readings when the 11d tool is connected without it connected just an alert or nothing |
||
![]() |
|
Frans@Yamorna Member Since: 15 Apr 2017 Location: Tzaneen Posts: 147 ![]() ![]() ![]() |
Good news of some sort.....at least it reads the pressures and can display it |
||
![]() |
|
Frans@Yamorna Member Since: 15 Apr 2017 Location: Tzaneen Posts: 147 ![]() ![]() ![]() |
Where do you see it on iid tool?Best I can see on tool is that the pressure is "OK"!! Thanks 2012 TDV8 Vogue SE 4.4 |
||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
