![]() | Home > Maintenance & Mods (L322) > Viscous fan removal |
![]() ![]() |
|
|
Baltic Blue Member Since: 13 Aug 2015 Location: North Wales Posts: 3788 ![]() ![]() ![]() |
Assuming it is a 4.4tdV8,
|
||||||
![]() |
|
j_rov Member Since: 10 Jan 2017 Location: Warwickshire Posts: 386 ![]() ![]() |
thanks, its a 3.6.
|
||
![]() |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35476 ![]() ![]() |
theres a link in the wiki that covers your 3.6, any thing in there ? ... - .- -.
|
||
![]() |
|
j_rov Member Since: 10 Jan 2017 Location: Warwickshire Posts: 386 ![]() ![]() |
Yes, I have followed that one. It says LH thread. I'm undoing clockwise but it just wont budge. __
|
||
![]() |
|
Highroller Member Since: 18 Jul 2016 Location: Hampshire Posts: 565 ![]() ![]() ![]() |
j-rov. Let me know how you get on. As I need to take mine off in the spring. I did attempt with the correct tools, but felt VERY tight, as you are experiencing.
|
||
![]() |
|
p38arover Member Since: 16 Dec 2015 Location: Western Sydney Posts: 1538 ![]() ![]() |
It doesn't matter if it's LH or RH thread, it always undoes in the same direction that the fan spins. Ron B. VK2OTC
|
||
![]() |
|
j_rov Member Since: 10 Jan 2017 Location: Warwickshire Posts: 386 ![]() ![]() |
YES! Dunnit
|
||||
![]() |
|
Highroller Member Since: 18 Jul 2016 Location: Hampshire Posts: 565 ![]() ![]() ![]() |
well done. That gives me hope now. |
||
![]() |
|
![]() ![]() |
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
![](../images/layout/footer/disclaimer.gif)