I've tried searching but couldn't find much, what parts do I need to fit a tow bar?!

How hard did you try

There's even a video half way down this page - I didn't watch it, but hopefully will help

That must be where I went wrong

I used the forum search and typed tow bar

Thanks 

IMHO, your best bet is to call PFJones, explain what you have & ask them

https://www.pfjones.co.uk/tow-bars/towbars...wbars.html

Some potentially useful info on this thread also

http://www.ebay.co.uk/itm/Range-Rover-L322...SwdGpZjvuR A few of these on ebay

I bought all my westfalia OEM kit from PF Jones including the wiring kit and OEM plug and play ECU that fits in the rear side compartment

You have no tow bar bits.....

The pics are of the towing eye, these come off and are replaced by the armature which bolts onto the car into which either the detachable receiver or the framers hitch fits.

PF jones is a good idea, or failing that get a price off a local fitter you may find that they can get a discount and get it direct from westfalia and fit it for not much more, depends on the fitter tho.  There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
Fiat 500x 1.4 multiair Lounge 2015
2010 LR D4 Commercial 2.7 TDV6

I fitted mine myself but it is quite involved and obviously critical to get it right.
The other thing is the sealing pads you get are minimal and my boot was filling up with water very quickly in the rain until i removed it and sealed it along the top lip better.

I had to tow an unloaded car trailer on the weekend. (The L322 came standard with a tow bar in Australia.)

The movement and consequent rattling of the gooseneck in the receiver really annoyed me. I think I'll need to weld on a nut for a clamp bolt. Ron B. VK2OTC
2003 L322 V8 Auto
2007 Yamaha XJR1300
Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA