Ok mot advisory that the front pads may require replacing. Having a 4.2 sc brembo pad replacements are approx £120.00.
Any other pads worth considering ? Or should i stick with whats previously been fitted. Appreciate that you dont want to compromise on safety with regards brakes,but wonder what others have used and how they compare. £120 for a set of brake front pads seams steep ,am i just paying for the brand when a simular quality product is out there.The part number is sfp500070.
All opinions and advice appreciated. Full fat 4.2 Sc
Full fat vogue 4.4 petrol
Jaguar XJR super charged
Porsche cayenne
Tvr tuscan mk1
Bmw mini cooper

Not sure about an alternative as only use genuine on mine but think of it in terms of costing less than 1p per mile.

And remember there's only a very small number of critical bits mainly the rubber in contact with the road and the brakes that allow you to stop a 2.5T hunk of metal quickly and safely.

Just my view  2021 D350 Fifty Edition - Carpathian Grey
2017 4.4 SDV8 Autobiography (2021-2024) - Santorini Black
2012 4.4 TDV8 Westminster (2016-2021) - Santorini Black

i agree with Rob..only use OE genuine pads.... ... - .- -.




Y. O. L. O.
.

Cheers, brembo pads it is then,just thought a more moderately priced pad might have been available that would have performed equally Well. Certainly dont wish to compromise on safety for the sake of £50.00 Full fat 4.2 Sc
Full fat vogue 4.4 petrol
Jaguar XJR super charged
Porsche cayenne
Tvr tuscan mk1
Bmw mini cooper

I had mine changed 2 weeks ago, using genuine LR pads, but my front wheels are full of black brake dust after every journey.
I wish they could come up with a way of reducing the problem. They must be a very soft compound. G reg 2.5VM Vogue Portofino red 1991- 1999
V reg 2.5td P38 Rioja red 1999- 2006
53 reg td6 Vogue Oslo blue 2006- 2015
11 reg 4.4 TdV8 Vogue SE. Baltic blue 2015- date.
https://www.fullfatrr.com/forum/topic56162...tty+affair

Dust - tell me about it! I get a terrible coat of brake dust within two days of a wash...

Is there such thing as a low dust pad?

. Cheers, Greg
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
2011 Vogue SE 4.4 with lots of toys in Stornaway

I was in the same situation and although genuine pads would have been my preferance, £120 is steep. So I went with Delphi pads and I cant fault it tbh. (It had PAGID pads on previously). I did use the genuine pad wear sensor as I got them from fleBay for £7.

Pins nicely cleaned and Ceratec grease applied. Discs painted with VHT matt silver paint and it looks a dream.

Next task is to replace rear pads and discs (weather permitting) Current:
- L560 Velar HSE R-Dynamic D180
- Peugeot 508 2011 - 2.2 HDi GT

Past:
- FFRR V 2010 - 3.6 TDV8
- Citroen C4 1.6i Petrol
- Mitsubishi Shogun 3.2 DID
- Peugeot 607 2.2 HDi
- Nissan Primera 1.8 SVE
- Honda Civic 1.6 VTEC

USE EBC greenstuff or similar red/blue miles better braking and no dust wouldn't go near jlr or oem ever again  _____________________________________________________
Zambezi silver Vogue Se unique

Get yourself on the demon tweeks website. The brembo are a standard size I use the same size pad in my race car. I wish they just cost 120 gbp..... the ebc are always a good all round pad.

gonna_go_double_r wrote:

Dust - tell me about it! I get a terrible coat of brake dust within two days of a wash...

Is there such thing as a low dust pad?

.