Yes sorry I did have the factory kit which I used to use on a payg simm just wanted to use one number rather than two
Just means now if anyone wants to contact me they have too ring me on a Vodafone simm rather than my EE number which everyone normally uses

Hi yes I have the factory fitted option do you think that's why my voice control was speaking when I touched pin 32too 36
Didn't know I had to remove any other units apart from the phone unit what other units do I have to disconnect if I decide to have another go
Also my BMW ulf has mit ses voice control

My TD6 didn't have factory phone when I fitted ULF and others have had no issues fitting when it's not there. I'm sure a few have fitted it who have factory phone but it was all unplugged. I have no idea how the rewire would have affected operation with the other units plugged in. The ibus must have been pretty confused with 2 voice recognition units.

You only need to completely unplug the old units, not remove them.

If it were me, I'd have another go, as I think the ULF works well, is factory from BMW and you just need your mobile in range.

Sorry, I never thought to ask if you already had factory phone. 2011 Range Rover Vogue SE 4.4 TDV8

Previous cars :
2003 Range Rover Vogue TD6
1999 Discovery Td5 ES
1995 BMW M5 3.8 6 speed
1992 Range Rover 3.9 Efi Vogue
1992 BMW M5 3.8
1988 BMW 735i SE
1989 Ford Sierra XR4x4 2.9i
1981 Ford Fiesta Supersport

Hi thanks if I decided to have another go at the repin what other bits do I need to disconnect the voice control unit is one are there any others thanks

I don't think there is anything else. The TCM will obviously already be disconnected as you are repinning the connector thar wnt to it, but make sure all the other connections are removed from it.

 2011 Range Rover Vogue SE 4.4 TDV8

Previous cars :
2003 Range Rover Vogue TD6
1999 Discovery Td5 ES
1995 BMW M5 3.8 6 speed
1992 Range Rover 3.9 Efi Vogue
1992 BMW M5 3.8
1988 BMW 735i SE
1989 Ford Sierra XR4x4 2.9i
1981 Ford Fiesta Supersport

HI
don't want to hijack someone elses thread but I am considering doing the same thing on mine as I have lost incoming audio on my handsfree with factory fitted phone and I can buy a ulf for the same price as a new telephone module.
Can anyone tell me if a an X5 2004 revision 8 ulf will pair with an iphone please?

This thread might help (check links to pinout charts etc.)

http://www.fullfatrr.com/forum/topic35589.html .
Experience is the only genuine knowledge, but as time passes, I have forgotten more than I can remember
Volvo V70 P2 2006 2.4 Petrol 170bhp Estate SE
MG Midget Mk1 1962

Previous: L322 Range Rover TDV8 3.6 2008; L322 Range Rover TD6 3.0 2002; P38A Range Rover V8 1999

Thanks for that will have a read.

Sorry it doesn't answer the ulf version / iphone question (adding which iphone version may help). .
Experience is the only genuine knowledge, but as time passes, I have forgotten more than I can remember
Volvo V70 P2 2006 2.4 Petrol 170bhp Estate SE
MG Midget Mk1 1962

Previous: L322 Range Rover TDV8 3.6 2008; L322 Range Rover TD6 3.0 2002; P38A Range Rover V8 1999

I may be mistaken but it will work however you need v9 for the full phone book on steering control functionality

Thanks for that have it all installed but have no audio think I need an ses jumper for the old voice module plug but can't find anyone selling them and bmw say they are no longer listed.

Madmutt0 wrote:

Yes sorry I did have the factory kit which I used to use on a payg simm just wanted to use one number rather than two
Just means now if anyone wants to contact me they have too ring me on a Vodafone simm rather than my EE number which everyone normally uses