i've always had a breaker bar and small extension in the wheel well and never have or will use the supplied wheel nut wrench so, out that comes and the breaker bar goes in its place..
but i had to chop about 3cm's off the end to make it fit...
i also took out the triangular foam thingy that the lock nut goes in and replaced it with foam wrapped around the extension bar/socket and lock nut..

Good job Stan, I see you have been busy again !! I do hope you won't need the breaker bar ever though. Do you have the hydraulic sprinter jack in there somewhere as well ??

Instead of a breaker bar, I have a "cross wrench" in the back, they have worked well for me over the years. I am considering getting a long (60 cm) breaker bar as well anyway  MY 2010 5.0 SC Galway green and sand interior!!
Have the Faultmate MSV2 Extreme to be tinkering with the settings etc. !!

sprinter jack is in the rear home made boot cubby ..

Nice !!! MY 2010 5.0 SC Galway green and sand interior!!
Have the Faultmate MSV2 Extreme to be tinkering with the settings etc. !!