Home > Technical (L322) > Battery replacement in 2011 L322 |
|
|
Andy B Member Since: 03 Apr 2012 Location: West Malling Posts: 1223 |
Got mine replaced by a local ATS garage. They removed the scuttle and wipers. Bit of a PITA, but it worked.
|
||
18th May 2017 1:51pm |
|
mpirie Member Since: 26 Jun 2012 Location: In the Highlands Posts: 899 |
I think the screws are "anti-tamper" screws. |
||
19th May 2017 8:21am |
|
Baltic Blue Member Since: 13 Aug 2015 Location: North Wales Posts: 3776 |
|
||||
19th May 2017 8:29am |
|
mikeyyn Member Since: 17 Oct 2011 Location: Notts Posts: 53 |
Err, not simple, more recent cars have an ECU in the way with the tamper proof bolts.
|
||
19th May 2017 9:54am |
|
Baltic Blue Member Since: 13 Aug 2015 Location: North Wales Posts: 3776 |
I am sure you are right.
|
||
19th May 2017 10:18am |
|
TomCobbly Member Since: 29 Jun 2016 Location: Guildford Posts: 122 |
I did mine a few months ago and it wasn't too bad. You need to put the bonnet in the service position, disconnect the battery and then disconnect and remove the ecu. IIRC I found it easier to remove the ecu mounting bracket with the ecu. The ecu was just fixed with torx screws. Then undo the battery clamp and lift the battery clear.
|
||
19th May 2017 12:02pm |
|
mikeyyn Member Since: 17 Oct 2011 Location: Notts Posts: 53 |
Has been tampered with, and new battery installed. FOC from Maltings in Westwoodside not far from Doncaster, recommended.
|
||
19th May 2017 1:47pm |
|
rvbush Member Since: 08 Jan 2016 Location: Leamington Spa Posts: 541 |
Hang on a minute! Slightly off topic, but if you can a tool to remove tamper proof torx, they aint tamper proof are they? Drives:
|
||
20th May 2017 7:50am |
|
SidewaysMatt Member Since: 24 Feb 2016 Location: Ledsham, Cheshire Posts: 173 |
Yeah, I bought a set of tamper proof torx bits from machine mart 😁 2004 Vogue TD6 - Remapped
|
||
20th May 2017 10:59am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis