6HP26 Running temperature | |
I am running a 2006 4.2SC US spec and curious what others are seeing for transmission temperatures.
I have done the new filter and Mercon SP fluid refill, reset the adaptions (then shortly read not too). Drove the care about 1000 miles are the transmission sorted itself out. But I've been keeping an eye on it and had some leaks from the front pan gasket, sorted that, then the drain plug started leaking, sorted that now it looks like the front seal might be leaking. Checking into it, it looks like the fluid is over filled - which I don't remember being a problem at the time of filling it up.
Anywho, just monitoring temperatures and such before draining and filling (have 4 quarts of new fluid to put in). I notice it runs around engine temp, 203-205*F(95*C). I am reading temperature w/ IID Tool. Googling '6HP26 temperature' I see some suggesting to never let the transmission exceed 95*C.
So, what's everyone else's run at?
I should mention that the transmission works fine. Only issue I have is a hard 1-2 or 2-3 shift when cold (~30-50*F).
|