Home > In Car Electronics (L322) > Camera system fault |
|
|
Cam-Tech-Craig Member Since: 03 Aug 2011 Location: Gloucestershire Posts: 16298 |
One's out, all out as far as i would be aware... i.e. disconnect/damage one cam and the whole system will shut down...
|
||
25th Jun 2016 9:45am |
|
JCW Member Since: 13 Apr 2013 Location: Cotswolds Posts: 871 |
Not sure thats correct, I had two camera's 'blue screen' (door mirror & front bumper) but the remaining continued working ok, guess it depends on the cause of the fault being system wide or isolated to the camera in question. |
||
25th Jun 2016 9:59am |
|
Cam-Tech-Craig Member Since: 03 Aug 2011 Location: Gloucestershire Posts: 16298 |
I had to replace a mirror on a customers car and because that mirror was disconnected, the whole system went down! Connected a new one and it all worked again... Not exact science i realise but... |
||
25th Jun 2016 10:37am |
|
Gregr Member Since: 05 Mar 2016 Location: Scotland Posts: 12 |
I have two blue screen on my system. Front left bumper camera is absent (where do I get a replacement?) and the other three are all working fine.
|
||
26th Jun 2016 8:04am |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35379 |
a faulty camera would probably still let the others work ok, a bang on the wing mirror assembly could 'break' a circuit causing the rest to fail.. ... - .- -.
|
||
26th Jun 2016 8:45am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis