Just updated my car washing regime for the new car.

Pressure Wash
Snow Foam
Pressure Wash
2 Bucket Wash (Shampoo and Rinse) with grit guards, wash car with swirl free mittens, wash wheels with separate wheel cleaning mitten
Pressure Wash
Dry with super soft micro fibre drying towel

Pleased with the results, snow foam is fun

Hi mate,
I too love the snow foam, just not a lover of getting the stuff washed off the drive afterwards.
how often do you clay bar the FF?

nice job
jake 2003 Range Rover Vogue 4.4 on Gas
1961 88" 2.25 diesel - George
Gone - 1997 3.9 V8i Discovery - Burt

Haven't tried using clay bar yet, only owned the car for about 3 weeks !

V similar process to mine, I just finish with a coat each of poorboys black hole & natty's paste.
Still takes me 4 hours tho  2011 (MY12) 4.4 TDV8 Vogue
2016 Golf GTI PP

Gone
Audi A4
VW Passat
VW Corrado G60
VW Golf GTI
BMW E30
Mini
Vauxhall Chvette

Personally I like a thicker foam I usually follow roughly the same procedure and leave the foam to dwell for about five minutes one thing I invested in was a pet hairdryer they are about £60 on the bay and make drying the car easier and touch free to reduce the risk of scratching L322 2008 vogue
R53 Cooper S Works tuned beyond the works SOLD
R33 Nissan Skyline in rebuild 400bhp atw

Personally i dont power wash as ive seen what happens with just the tiniest stone chip which the FF's are susceptible to

I just soak it a few times before getting on with the woolen wash mitt and gentle washing, then rinse, empty bucket and do it again before cheating and demon shining it by hand.

Im not too worried as i applied many layers of wax a long while ago and its due a few days of detailing sometime soon which will restore it anyway  FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.