I am trying to reflash my bluetooth module with no luck, i have bought a new battery today and have a CTEK max 7.0 attached to the battery so everything is fully charged, then when i go to start the reflash i get a message saying the voltage is below 11.5v operation aborted.
Has anyone had the same problem while trying to reflash? or any pointers would be great.

If you bought the battery today I would give it 24 hrs on charge to ensure it is fully charged. If it has been on the shelf for a while it may have discharged a bit.

Also when you try to reflash have you turned everything else off - air con, screen, radio? John
2008 Stornoway Grey 3.6 Tdv8 Vogue - SOLD
2005 TD6 Java Black Vogue - Written off!!
GAP iiD BT-Sold

Hi Weegie thanks for your reply. yes i had everything switched off just the ignition was on..

Update.. Battery been on charge all night and is now fully charged but I'm still getting the voltage below 11.5v on the iid tool, when i go into the live values for the battery it is saying that the voltage is 12.9v

That's not good.... send Pat at Gap a message, they are very helpful....  Pete
__________________________________________________
2014 L405 Autobiography SDV8 4.4 Loire Blue Ebony interior
2012 L322 Autobiography 5.0 Supercharged Ipanema Sand Sold
2011 L322 Vogue SE 4.4 TDV8 Baltic Blue. Sold
2002 L322 Vogue 4.4 V8 Epson Green (Fatty Offroader) Sold
-Click for Project Fatty off roader-

Problem sorted, i re updated the firmware on the iid tool via the computer and tried again and it worked, i must have done something wrong when i first updated the tool!!!!