I would like to repaint my bonnet grill and can see how the grill comes off but to remove the washer jets from the grill; is it a case of squeezing the little tang towards the body of the washer jet (on the underside of the grill) and pushing it through from below? That being the case, although the car is only 5 years old, is the plastic brittle enough to snap? If so I might get a couple of new ones just in case. 2010 5.0 SC Autobiography

My 13 year old ones came out and went back in fine... if they are cold, warm them up a bit with a hot air gun or SWMBO hairdryer....  Pete

__________________________________________________
2014 L405 Autobiography SDV8 4.4 Loire Blue Ebony interior
2011 L322 Vogue SE 4.4 TDV8 Baltic Blue. Parchment over Navy Interior. Sold
2012 L322 Autobiography 5.0 Supercharged Ipanema Sand, Jet Interior. Sold
2002 L322 Vogue 4.4 V8 Epson Green, Ivory over Aspen Interior (Fatty Offroader) Sold
-Click for Project Fatty off roader-

Thanks, so it is just a case of squeezing that tang towards the washer jet and popping it out the top? 2010 5.0 SC Autobiography

Yep, just pops out...  Pete

__________________________________________________
2014 L405 Autobiography SDV8 4.4 Loire Blue Ebony interior
2011 L322 Vogue SE 4.4 TDV8 Baltic Blue. Parchment over Navy Interior. Sold
2012 L322 Autobiography 5.0 Supercharged Ipanema Sand, Jet Interior. Sold
2002 L322 Vogue 4.4 V8 Epson Green, Ivory over Aspen Interior (Fatty Offroader) Sold
-Click for Project Fatty off roader-

Perfect, many thanks. 2010 5.0 SC Autobiography