Well for some reason the door lock on the drivers door and window buttons don't work.
BUT, the mirror buttons do...
The lock unlocks fine with the key..

Also if the mirrors are folded in or out the passenger one now doesn't do anything!!

Has anyone come across this before as I'm thinking;

Fuse possibly blown
Door control module failure(I think all the doors have them)

Thoughts anyone? Happened this morning as well so no big deep cold spell has caused it  FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.

Take the switch unit out and check it sometimes they get wet and have poor conections or burn out contacts, but check fuses first call

Would that affect the electrical side of the door lock though? FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.

the switches by the front of the window are separate to the door locks so you might have 2 problems ..unless the cabling has chaffed somewhere.. ... - .- -.




Y. O. L. O.
.

You could try Fuse 11, 30A on the passenger side board.
It's common to the drivers door window and the drivers door lock.

OOO NDF cheers for that

I'll give it a whirl and see if it fixes it  FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.

Well fuse removed and ok so out back in. Window switches now working but door lock not, and passenger mirror still not folding  FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.

battery disconnection Will? ... - .- -.




Y. O. L. O.
.

That's my IT professional solution coming up tonight just a pita being the 110ah unit lol FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.

Going to take the battery off today for a wee bit as yesterday the oddities got worse in that the drivers window still worked form the drivers door but the others didn't! they would work on their own doors but not the drivers control panel for some reason. Mirrors would adjust and drivers fold in but its very strange! FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.

Battery off for 45mins did nothing  FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.

is the battery ok, did you do a drop test on it? ... - .- -.




Y. O. L. O.
.

Battery is fine and dandy held 12.8v without issue
And its not that old and a 110ah been stressed a few times lately with the park heat but hardly much really for them.. FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.