my left hand dash vent seems to have collapsed inside ,is it just a prise off job to get to the gubbins...

Someone on here has done this and they will be along shortly to assist! Discovery 4 HSE
1998 110 TUM HS FFR Hard Top XD WOLF
1982 Series 3 Hard Top

*Gone:L462 D5 HSE LUX, L663 Defender 110 HSE, Discovery 3 HSE, 2014MY Range Rover Sport 5.0 Supercharged AB Dynamic; L405 Exec Vogue SE 4.4, 5.0 Supercharged Autobiography, Defender TDCi XS CSW, Defender TD5 HT, Vogue SE TDV8, Vogue TD6, RRSport SC 4.2V8, Classic 3.9 Vogue Auto, Land Rover Series 3 SWB

thank you muchly sir...

It's a bit fiddly to say the least.

From memory, I don't think you need to remove the whole side panel, look through the vent at each corner, you should see 4 square clip sections, get 2 small flat screwdrivers, I used precision ones, insert a screwdriver in opposite corners and pull the clips in, you should be able to extract the vent with just 2 clips out of the way. Don't worry if that makes no sense, once you look at the vent and see the 4 clips, you should know what I mean. 2006 Mercedes CLS
1991 Retro-style Mini
But really finding it hard to fight the urge for a S/C...

..job for when it stops raining..

M44K TS wrote:

It's a bit fiddly to say the least.

From memory, I don't think you need to remove the whole side panel, look through the vent at each corner, you should see 4 square clip sections, get 2 small flat screwdrivers, I used precision ones, insert a screwdriver in opposite corners and pull the clips in, you should be able to extract the vent with just 2 clips out of the way. Don't worry if that makes no sense, once you look at the vent and see the 4 clips, you should know what I mean.