The whole place was a complete mess after the summer's work with the terrace. I've finally (almost) completed the tidy-up, including the garage. Everything now in place to complete the winter/MOT prep of my VX, and start dismantling my aeroplane engine.

Click image to enlarge

Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated

It's a good space... Today I have been looking online for shelving for my new garage.
Do you get through a lot of the lube? Previously..
Vogue SE TD6
Defender 90 2.4
Defender 110 TD5
Vogue 3.5 EFI

Don't want to go in dry with equipment the size of mine.

What type of shelving you looking for contra ====================================

"Open Mike Night " sounded like a lot of fun until i found out i was going to an Autopsy

Maybe similar to Mr Verboses shelving. It's an empty shell just now so I am starting from scratch. I am looking for shelving, racking, lighting, workbench.... The works really... Previously..
Vogue SE TD6
Defender 90 2.4
Defender 110 TD5
Vogue 3.5 EFI

Got mine from Swiss ebay. When I picked it up the guy was also selling some tables with wheels on. Bought two - one fits under the other. They're increadibly useful and only about £15 each if I remember.

PM sent Contra  ====================================

"Open Mike Night " sounded like a lot of fun until i found out i was going to an Autopsy

Coffee table is looking good  Present :2008 TDV8 HSE
Gone Audi A5 2.7TDI
Gone Discovery 3 HSE
Gone Mercedes CLK
Gone Range Rover 2.5 DSE

Kurt you are nuts ! But i LIKE IT !  All my spelling errorz are belong to me!

2023 FFRR L460
2021 AM new Vantage

Love the ANAL LUBE you have there in a very large dispenser lol! FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.

Lighting i got for free but is CCFL and not the LED type


Workbench cost me £15 from ebay for a brand new worktop that was 4m long so done 2 work benches.

Plinths for them were free as well using freely picked up bricks with ready mix mortar (that was about £10 for 2 bags)

and the other benchs plinths are using my driveway blocks but as a drystone wall type affair so no mortar but very stable as its more of a storage area than a work bench.

Shelving i got from a shelving place near fiddlers ferry that was £15 per rack and each shelf can take 75kg which is more than enough for most bits and bobs.

Ebay is thy friend with so many places closing down or some liquidators as well can be a good source  FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.

Here you go contra

http://www.ebay.co.uk/itm/3-Bay-Shelving-U...27c2fbf4e8

http://www.ebay.co.uk/itm/KITCHEN-WORKTOP-...33875f2639

Just for starters

A good mancave neednt cost the earth and leaves more pennies for playthings in the man cave  FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.

Aye, that's the ticket Will.. Think I'll get that style of shelving ...  Previously..
Vogue SE TD6
Defender 90 2.4
Defender 110 TD5
Vogue 3.5 EFI

I have a slightly different version but still boltless but can be assembled in half heights as well which helps but i reckon all in it cost me £100-130 to sort out and not much more is needed to finish it off as just the lights left to hang and wire up and some sockets as well  FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.