The front passenger door seems to need more of a slam to close it than the other doors. Passengers always have to close the door twice. Is there an easy way to adjust it? 2012 5.0L S/C
Previous:
3.6 TDV8
4.4 HSE
P38 4.6 HSE
Classic 3.9
90 County
Series3 Lightweight

very easy.. i think there are 3 screws on the door pillar that you undo and move...if the door is hard to close, move it outwards slightly.. ... - .- -.




Y. O. L. O.
.

First check all the seals on the door and frame. Maybe a seal or trim is getting in the way and putting a bit of extra pressure on the door.

FFRR doors and hinges are pretty sturdy. My rear door got caught by a Honda driving of in a very tight car park. The edge/tip of the door ripped off the plastic fender extender and dented the wheel arch. My door corner just had a little scuff mark on the corner point and the door hadn't moved out of alignment at all and I felt the FFRR move when it happened (was strapping my daughter into the car seat).

So first check the trim, seals etc. before you start adjusting is my suggestion  MY 2010 5.0 SC Galway green and sand interior!!
Have the Faultmate MSV2 Extreme to be tinkering with the settings etc. !!

Thanks guys. Travelling at moment, in a hire car in Portugal, so will check when I get back next week.

Thanks again for the tips. Really fast and helpful as always  2012 5.0L S/C
Previous:
3.6 TDV8
4.4 HSE
P38 4.6 HSE
Classic 3.9
90 County
Series3 Lightweight