hi, does anyone know a good alternative to this part LR003894, ideally something less than 100quid or is the lr part the best option in terms of fit and quality?

You could always DIY?

http://www.rubbermattinguk.co.uk/index.php...duct_id=94

Rough dimensions of boot are 1000mm deep by 1400mm wide (including recess by rear fusebox)

Am tempted myself.  .
Experience is the only genuine knowledge, but as time passes, I have forgotten more than I can remember
Volvo V70 P2 2006 2.4 Petrol 170bhp Estate SE
MG Midget Mk1 1962

Previous: L322 Range Rover TDV8 3.6 2008; L322 Range Rover TD6 3.0 2002; P38A Range Rover V8 1999

There's this one http://www.supertweaks.com/range-rover/ran...ection-mat

And fits within your budget  MY11 Vogue 4.4 TDV8 - "African Queen"

Whats its intended use Warnster as a rigid load liner may be a better idea  FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.

Intended use is nothing extreme, just loading up kids bikes, surf gear wetsuits etc..just after a bit more protection in the boot area.
The link posted looks good and not so pricey so will prob go for that.
Cheers.

I wish I had got one of these.

I got mine off ebay for around £50. It is pretty good quality, but it does stink!

or if you want a genuine one, they come up second hand on Ebay often enough.

http://www.ebay.co.uk/itm/GENUINE-RANGE-RO...2c6d0b3a42 Lloyd Barnes

Current
Crendon 427 Sideoiler Cobra in build... 7 litres of madness!

Gone
2008 TDV8 Vogue - Black with Ivory/Grand Black Lacquer
2008 VW Touareg 3.0Tdi
6.3litre Dax Cobra - 12.34 Second 1/4mile at 114mph

I bought genuine 2nd hand one from eBay - perfect for about £40 (and no smell!) 2007 Zermatt Silver TDV8 Vogue SE - now sold but was a great car!

Shamelessly plugging a sale BUT

If its for anything wet then the only ones i recommend are rigid liners like these...

http://www.fullfatrr.com/forum/topic13461.html

Even broke ones are easy to fix and being the rigid type any smells dont seep into any rubber and if they need a wash just whip it out, hose it down, dry with a towel and back in the car it goes  FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.

Britpart do one that is shaped to fit and looks the part. Discovery 4 HSE
1998 110 TUM HS FFR Hard Top XD WOLF
1982 Series 3 Hard Top

*Gone:L462 D5 HSE LUX, L663 Defender 110 HSE, Discovery 3 HSE, 2014MY Range Rover Sport 5.0 Supercharged AB Dynamic; L405 Exec Vogue SE 4.4, 5.0 Supercharged Autobiography, Defender TDCi XS CSW, Defender TD5 HT, Vogue SE TDV8, Vogue TD6, RRSport SC 4.2V8, Classic 3.9 Vogue Auto, Land Rover Series 3 SWB

http://www.ebay.co.uk/itm/RANGE-ROVER-VOGU...3f22fa2762 ====================================

"Open Mike Night " sounded like a lot of fun until i found out i was going to an Autopsy

If I'm not wrong, I think the Britpart one is more like the semi rigid loadspace liner rather than rubber boot mat - http://www.britpart.com/Accessory.aspx?AccessoryRef=2114

IIRC I got quoted just shy of £60 for this part when I enquired.

They don't have the equivalent rubber mat, but just sell the OEM one if i'm not mistaken MY11 Vogue 4.4 TDV8 - "African Queen"

How about this

http://www.skidrive.co.uk/car-covers/produ...tAodmXYAKQ Three things in a blokes life his dog,his car and a Cornish pasty,nothing else matters.

2010 Range Rover Vogue SE Santorini Black, Arabica Aniline seats

Previous cars
1973 Mini 1000
1971 Hillman Avenger
1975 Chrysler Sunbeam
1981 Ford Cortina
1985 Volvo 340
1989 VW Golf
1989 Volvo 240
1991 Volvo 240
1991 Jaguar Soveriegn
1996 BMW 730
2003 Honda CRV
1999 Jaguar Soveriegn
2003 Range Rover HSE Epson Green with Sand trim.

If its anything like his Spelling of Vogue  ====================================

"Open Mike Night " sounded like a lot of fun until i found out i was going to an Autopsy