Does anyone know the height of the detachable tow ball when fitted and the RR is at normal height. I need the height to the top of the ball please. I have just changed from a 2006 D3 to a 2008 FFRR and need to tow my racebox with the floor level. I used a fixed towbar with the multiheight ball on the D3 but would like to get away with the removable one on the new car. Any help would be most appreciated

From memory the tow heights are in the owners handbook  Currently running FFRR MY10 TDV8 3.6L and a Disco 3 XS Commercial (tank like but very effective as a Company van). Plus one mint condition Track Day Car in the form of an E36 M3 3.2L Evolution circa June 1996 with lots of go faster bits and only 52k miles on the clock! Oh, plus a few bits to make it slow down really quickly as well! Luvverly.

Geraint

Why not remove the plate type, when not in use and keep it in the garage? I do.

I will try and measure mine over the weekend, as I have both

Handbook heights and real life tend to be quite different

42cm  2008 MY Supercharged
Rimini Red / Jet
four zone climate
remote park heater
and no ugly kid windows.
magnus satis quod turpis satis

Thanks for all the info
I have now decided to try the detatchable one.
I must say that Nick at Yeovil has been really terrific. If you are looking for advice on parts or just to buy parts you must contact him. Support the guys who support our site.

If you still need the info I can measure mine on a level piece of ground at home later. Discovery 4 HSE
1998 110 TUM HS FFR Hard Top XD WOLF
1982 Series 3 Hard Top

*Gone:L462 D5 HSE LUX, L663 Defender 110 HSE, Discovery 3 HSE, 2014MY Range Rover Sport 5.0 Supercharged AB Dynamic; L405 Exec Vogue SE 4.4, 5.0 Supercharged Autobiography, Defender TDCi XS CSW, Defender TD5 HT, Vogue SE TDV8, Vogue TD6, RRSport SC 4.2V8, Classic 3.9 Vogue Auto, Land Rover Series 3 SWB