any advice on cleaning diamond polished wheels? I hear the lacquer can chip and then the alloy corrodes.

Click image to enlarge

You'll be lucky if you manage 2 years out of them before they start corroding. The clear coat doesn't last in this country because of the salt on the roads.

Plenty rim wax should help preserve them for a bit longer but don't expect too much

We're all doomed!!!



Craig

I've had polished alloy wheels on mine for over a year now and so far do good. No corrosion. Like others say through keep em nice and clean and plenty of protection. FFRR TD6 HSE
Adriatic Blue with Parchment leather.

i used to sell Alloys for a living and found that the best thing for all alloys was to put lots of wax on them and then to coat with back to black/ Cockpit shine........ or other good silicone spray products... it does work as long as you clean and replace regular...... If i could would you!!!!

wd40 is your friend, only problem is all the dirt then sticks to it.

Rim wax!!!!

Couldn't make this stuff up!!! FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.

You can always get them recut in a few years time

They look great! bet you paid an arm and a leg for them!

One of my least favourite wheels in the L322 sadly. Discovery 4 HSE
1998 110 TUM HS FFR Hard Top XD WOLF
1982 Series 3 Hard Top

*Gone:L462 D5 HSE LUX, L663 Defender 110 HSE, Discovery 3 HSE, 2014MY Range Rover Sport 5.0 Supercharged AB Dynamic; L405 Exec Vogue SE 4.4, 5.0 Supercharged Autobiography, Defender TDCi XS CSW, Defender TD5 HT, Vogue SE TDV8, Vogue TD6, RRSport SC 4.2V8, Classic 3.9 Vogue Auto, Land Rover Series 3 SWB

Agree with above, sadly the do look like a halfords drive through and dont suit the lines of the rr at all

^^ Deals with delicate wheels from about 10:45



^^ Once the wheels need a really good polish. Researching my first Range Rover purchase

[]

Just spotted your username, did you have a white s2?