Well this wasn't the way i was going to celebrate 1000-posts, but its well worth it. I had planned on something involving boobs and probably a telling off from Stan but would have been worth it. (sorry guys)
Unfortunately I found out my best mate Poppy the black lab has the start of arthritis in her elbows. Totally gutted. She's only 4 so she's quite young but it's early days. To help her on her way and try and make her future less painful i want to get her a ramp to help her get in and out the FFRR, without damaging her joints. Does anyone have one or can you recommend a good one? [img]http://www.fuelly.com/driver/rob2529/range-rover[img/]
04, 4.4V8, Vogue Oslo Blue with LPG.
"You can sleep in your car, BUT you can't race your house!!!!"

If something can't be fixed with a hammer....... You have yourself an electrical fault!

It's going to have to be a heck of a big ramp to get up to the tailgate height

Sorry about the news fella with the ff height it may be a problem.

Maybe convert a small ladder with some bits of mdf nailed on and beading as well to aid grip?? FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.

Pets at home do them and they are £99 3 fold frame from tailgate to ground , here's one on eBay


http://www.ebay.co.uk/itm/Pet-Gear-Dog-Ram..._500wt_922

Last edited by JOKER on 22nd Aug 2012 10:04pm. Edited 1 time in total

Would something like this be too steep ??

http://www.lintran.co.uk/dog-ramp-160.html

have a look on this thread http://www.fullfatrr.com/forum/topic11888.html?highlight=ramp
it may well contain what you want.

steve

Cheers guys. I've seen that one Mick an think that's the best I've seen. I don't think the steepness is a problem, anything to stop her doing more damage due to the impact on her elbows as she jumps out the back. What's the height of the tailgate in access height? [img]http://www.fuelly.com/driver/rob2529/range-rover[img/]
04, 4.4V8, Vogue Oslo Blue with LPG.
"You can sleep in your car, BUT you can't race your house!!!!"

If something can't be fixed with a hammer....... You have yourself an electrical fault!