Mine has a crack in it on the drivers side, its probably not noticeable to the rest of the world buy you know how it is

Simple question do these just pull off, and if so is it upwards, downwards or straight out?

I know you can get replacements but a bit of epoxy on the back might be all it needs. Geoff

They are screwed on the whole length of the step... About every 4-6" but they normally rust into the step...


Craig

Thanks mate - sounds like I'm screwed  Geoff

Hi, just seen this post. I repaired mine a few weeks ago, it wasnt too bad to get the screws out, they go into nylon bushes so not too corroded.

Like you mention, epoxy repair across the back of the crack, sand and fill, then two coats of titanium silver. Or Brunel grey, if you prefer to match original.

The strips are avilable through Dan at Duckworths for £62 plus vat, or are on the Bay at £90 a pair.

Thanks "paneldamage"

I'm encouraged and might get on and give it a shot this weekend - weather permitting  Geoff

Having done this now and repainted - it was all pretty simple - I think they may look better black. Has anyone done this and could share a photo?
 Geoff

Did you repaint them brunel grey as i am thinking of taking mine off and doing them in Titanium silver to match the side vents