Home > Technical (L322) > can suspension compressor be stripped/repaired? |
|
|
Joe90 Member Since: 29 Apr 2010 Location: Hampshire Posts: 6408 |
And I thought I was cynical .
|
||
23rd May 2012 8:20pm |
|
47p2 Member Since: 05 Oct 2010 Location: Gone Beyond, Subaru Posts: 8048 |
Cynical, is that part of the pump |
||
23rd May 2012 8:25pm |
|
Joe90 Member Since: 29 Apr 2010 Location: Hampshire Posts: 6408 |
Yes, its the inverse cone (cynical not conical) shaped device that enables the flux capacitor to raise the pressure so that the dilithium crystals can send the EAS in warp drive .
|
||
23rd May 2012 8:28pm |
|
47p2 Member Since: 05 Oct 2010 Location: Gone Beyond, Subaru Posts: 8048 |
It might work better if they changed the dilithium crystals for some Dilithium, Li2 which is a strongly electrophilic, diatomic molecule comprising two lithium atoms covalently bonded together. Li2 is known in the gas phase |
||
23rd May 2012 8:33pm |
|
Meerbusch Member Since: 16 May 2012 Location: Zürich (CH) + Düsseldorf (D) Posts: 316 |
... Of course you have WARRANTY, 12 month, when I fit the parts (no extra pay!!!), if you send me the compressor in a box, I send back immidiatly after one day, you only must pay the shippingcosts to GB, so you have 190 + ca. 20 shippingmoney. For member of this forum, I make special-price inkl. shipping and fitting for 200! |
||
24th May 2012 6:04am |
|
T24RES Member Since: 22 Nov 2010 Location: Henley-on-Thames Posts: 936 |
I'm sure you'll be sponsoring the site any moment now |
||
24th May 2012 9:47am |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35281 |
Meerbusch, can you have a look at the selling rules please...
|
||
24th May 2012 10:47am |
|
Rob2529 Member Since: 22 Nov 2010 Location: Wirral, uk Posts: 1470 |
Sounds expensive for a kit. The P38 ones are coming in about £40 for a similar thing. What are the new piston rings made from? I know Preston air were working on a double stage compressor 2x as efficient etc and the wasn't going to cost that much more than the kit offered here. [img]http://www.fuelly.com/driver/rob2529/range-rover[img/]
|
||
24th May 2012 10:49am |
|
Meerbusch Member Since: 16 May 2012 Location: Zürich (CH) + Düsseldorf (D) Posts: 316 |
@ stan, oh, sorry for not reading the rules, of course I will pay some money for this site, send me an offer in a PM, no problem!!!!
|
||
25th May 2012 6:04am |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35281 |
if you pm martin [forum site owner] then i'm sure something can be arranged.... ... - .- -.
|
||
25th May 2012 7:41am |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35281 |
it has been brought to my notice that you can get new ones for around £280 from a uk distributor...
|
||
25th May 2012 2:58pm |
|
Joe90 Member Since: 29 Apr 2010 Location: Hampshire Posts: 6408 |
Just referring back to OP: "can suspension compressor be stripped/repaired"
|
||
25th May 2012 5:30pm |
|
Meerbusch Member Since: 16 May 2012 Location: Zürich (CH) + Düsseldorf (D) Posts: 316 |
) and Meerbusch says 200 EURO´s!!!!!!!!!!!!!!!!!!!!!!, that are, I believe: 165 GBP........... |
||
25th May 2012 7:15pm |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35281 |
thats a very valid point... ... - .- -.
|
||
26th May 2012 8:42am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis