the cd changer in my 02 plate Vogue has packed in,

if anyone has one lying around or know where they can be had without dealer prices,

even some model numbers would be great so that i can source on.

one that plays mp3's would be good

thanks again

cheers scotty

One like this ......

http://www.addacdchanger.co.uk/Range_Rover..._Alpine%29

http://www.soundmasterscotland.com/alpine_...19430.aspx

L322 RANGE ROVERS FROM 2002-2004

THESE RANGE ROVERS CARRY 2 DIFFERENT CHANGERS WITH PART NUMBERS BELOW

1) XQE000100 HAS 2 PLUGS ON THE REAR OF CHANGER(6 PIN & 3 PIN)

2) XQE000120 HAS 1 FLY LEAD WITH 1 (10 PIN) CONNECTOR

cheers mick,,

have you had any dealings with soundmasters scotland,, there not to far from me.

where in the centrel belt are you mate,, i'm in larkhall

cheers mate

scotty

Just came across their website while browsing as after the New Year going to Sound Systems in Glasgow to see about getting the screen on the dash connected to the rear screens,

I'm in EK ..

hows the snow up there, E.K always gets it sore, its chucking it down in larkhall.

thanks again mate

cheers scott

did you get a changer, as i am going to be removing my working factory one soon for an mp3 intravee system,

let me know

cheers ROB

hi rob,,

no i didnt get one,,been to busy at work to chase one up

would be interested if you are selling

how much are you looking for

thanks again

cheers scott

I've got a freelander one somewhere from my sister FL1 - do you have a picture of it / the leads '09 Freelander 2 TD4 HSE Auto for the Mrs

Using the works Fiesta 1.6 TDCI Sport Van - CHROME FREE THOUGH

Searching for a nice E63 AMG or S8 V10 to replace my "wonky" TDV8

PM sent


thanks

pm sent

how did you get on stripping the side off the rangie, was it fairly straight forward

how long did it take you

thanks again for getting back to me as quick

cheers scott

Hi stripped and rebuild in about 3.5 hours,

with some tooling & drilling for the upgrade I am fitting,

just watch the wood parts, very brittle, also the metal section at the bottom of the glove box is prone to shearing off, mine did , but super glue with activator and baking soda works a treat for a strong repair,

modelling secret for you!,

cheers Rob

rob mate, could you please give me a call back your number was withheld,,

cheers scott

pm sent

cheers scott

Hi all just to let you know this has been supplied,