![]() | Home > Maintenance & Mods (L322) > Marks on alloys |
![]() ![]() |
|
|
RRUK Site Supporter Member Since: 08 Jun 2007 Location: UK Posts: 6372 ![]() ![]() ![]() |
Gave the new car a good thorough wash today, the dealers always load up up on the silicone spray.
|
||||
![]() |
|
RRUK Site Supporter Member Since: 08 Jun 2007 Location: UK Posts: 6372 ![]() ![]() ![]() |
I've not tried a polish yet, also petrol not tried yet - always a good back stop for stubborn dirt.
|
||
![]() |
|
nbunney Member Since: 10 Aug 2008 Location: Lancashire Posts: 2040 ![]() ![]() |
Adam
|
||
![]() |
|
jayzee Member Since: 14 Oct 2009 Location: UK Posts: 342 ![]() ![]() |
Or a clay bar; also try AutoGlym Silicone Resin Polish. Don't use anything abrasive, else you'll take the lacquer off. |
||
![]() |
|
jez000 Member Since: 17 Apr 2009 Location: Yorkshire Posts: 742 ![]() ![]() ![]() |
It could be left over transport wax from new ? I had similar on my boxster wheels and clay bar removed it with a little effort. |
||
![]() |
|
ken Member Since: 22 Aug 2008 Location: On another forum Posts: 936 ![]() ![]() ![]() |
Those alloys are not OEM finish they have been refurbed (Nothing to worry about ) but if no laquer has been used then be careful with solvents |
||
![]() |
|
RRUK Site Supporter Member Since: 08 Jun 2007 Location: UK Posts: 6372 ![]() ![]() ![]() |
Ken how can you tell? Discovery 4 HSE
|
||
![]() |
|
ken Member Since: 22 Aug 2008 Location: On another forum Posts: 936 ![]() ![]() ![]() |
Very flat no depth
|
||
![]() |
|
itguy Member Since: 08 Dec 2009 Location: Melton Mowbray, UK Posts: 113 ![]() ![]() |
|
||
![]() |
|
RRUK Site Supporter Member Since: 08 Jun 2007 Location: UK Posts: 6372 ![]() ![]() ![]() |
They're in good nick, no pitting or corrosion so at the moment I have nothing to worry about.
|
||
![]() |
|
ken Member Since: 22 Aug 2008 Location: On another forum Posts: 936 ![]() ![]() ![]() |
Its very commonplace to ref |
||
![]() |
|
jayzee Member Since: 14 Oct 2009 Location: UK Posts: 342 ![]() ![]() |
Could still be an original finish though; just the acid cleaners used has dulled the lacquer over time.
|
||
![]() |
|
The doc Member Since: 25 Mar 2007 Location: In car hell :-( Posts: 425 ![]() ![]() |
If you need to get this close to see then leave them, it looks as though they have probably been cleaned with wheel acid that has been too strong or left to dwell for too long by an idiot valeter, come to think about it it was probably the same idiot that "cleaned" it prior to me viewing it. '09 Freelander 2 TD4 HSE Auto for the Mrs
|
||
![]() |
|
RRUK Site Supporter Member Since: 08 Jun 2007 Location: UK Posts: 6372 ![]() ![]() ![]() |
Doc,
|
||
![]() |
|
![]() ![]() |
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
![](../images/layout/footer/disclaimer.gif)