---

Revision as of 22:36, 6 December 2010

Service light reset – Land Rover

The procedures described below are relevant to the following European specification models:

Range Rover L322 2002 to 2004

Contents 1 1) Procedure to check/reset service status – Distance counter 2 Reset Distance counter procedure 3 2) Procedure to check/reset service status – Date counter 4 Reset Date counter procedure

1) Procedure to check/reset service status – Distance counter

• Switch ignition OFF
• Keep reset button pressed for approximately 5 seconds until the LCD displays ‘RESET SIA’. The distance to service (e.g. 2150 miles) and the service type (e.g. Inspection/oil service) will be displayed.
• Has the ‘Reset Distance’ limit been reached or exceeded?

NO - Follow instructions in section 2 below

YES - Follow ‘Reset Distance Counter’ instructions below

Reset Distance counter procedure

• Press and hold left instrument reset button for 5 seconds. ‘RESET’ will begin to flash on the LCD display.
• To reset distance the left hand button should be pressed before the ‘RESET’ message has flashed 5 times
• The LCD will display ‘END SIA’. Switch ignition off

2) Procedure to check/reset service status – Date counter

• Press left instrument panel reset button once
• The LCD will display ‘RESET SIA’ followed by the service due date.
• Has the ‘Reset Date limit been reached or exceeded?

NO – Press the left instrument button once. The LCD will display ‘END SIA’ to indicate the service interval check/reset procedure has been cancelled.

YES - Follow ‘Reset Date Counter’ instructions below

Reset Date counter procedure

• Press and hold left instrument reset button for 5 seconds. ‘RESET’ will begin to flash on the LCD display.
• To reset distance the left hand button should be pressed before the ‘RESET’ message has flashed 5 times
• The LCD will display ‘END SIA’. Switch ignition off