 |
fullfatrr.com Wiki > Service Reset Detailed Instructions |
(Difference between revisions)
Dan uk 1984 (Talk | contribs) (Created page with "Service light reset – Land Rover The procedures described below are relevant to the following European specification models: Range Rover L322 2002 to 2004 ==1) Procedure to ...") |
Dan uk 1984 (Talk | contribs) |
||
| (2 intermediate revisions not shown) | |||
| Line 1: | Line 1: | ||
| - | Service light reset – | + | =Service light reset – 2002 to 2004= |
| - | |||
| - | |||
| - | |||
==1) Procedure to check/reset service status – Distance counter== | ==1) Procedure to check/reset service status – Distance counter== | ||
| Line 9: | Line 6: | ||
*Keep reset button pressed for approximately 5 seconds until the LCD displays ‘RESET SIA’. The distance to service (e.g. 2150 miles) and the service type (e.g. Inspection/oil service) will be displayed. | *Keep reset button pressed for approximately 5 seconds until the LCD displays ‘RESET SIA’. The distance to service (e.g. 2150 miles) and the service type (e.g. Inspection/oil service) will be displayed. | ||
*Has the ‘Reset Distance’ limit been reached or exceeded? | *Has the ‘Reset Distance’ limit been reached or exceeded? | ||
| - | : NO - Follow instructions in section 2 below | + | :'''NO''' - Follow instructions in section 2 below |
| - | : YES - Follow ‘Reset Distance Counter’ instructions below | + | :'''YES''' - Follow ‘Reset Distance Counter’ instructions below |
==Reset Distance counter procedure== | ==Reset Distance counter procedure== | ||
| Line 21: | Line 18: | ||
*The LCD will display ‘RESET SIA’ followed by the service due date. | *The LCD will display ‘RESET SIA’ followed by the service due date. | ||
*Has the ‘Reset Date limit been reached or exceeded? | *Has the ‘Reset Date limit been reached or exceeded? | ||
| - | : NO – Press the left instrument button once. The LCD will display ‘END SIA’ to indicate the service interval check/reset procedure has been cancelled. | + | :'''NO''' – Press the left instrument button once. The LCD will display ‘END SIA’ to indicate the service interval check/reset procedure has been cancelled. |
| - | : YES - Follow ‘Reset Date Counter’ instructions below | + | :'''YES''' - Follow ‘Reset Date Counter’ instructions below |
==Reset Date counter procedure== | ==Reset Date counter procedure== | ||
Latest revision as of 22:41, 6 December 2010
Contents |
Service light reset – 2002 to 2004
1) Procedure to check/reset service status – Distance counter
- Switch ignition OFF
- Keep reset button pressed for approximately 5 seconds until the LCD displays ‘RESET SIA’. The distance to service (e.g. 2150 miles) and the service type (e.g. Inspection/oil service) will be displayed.
- Has the ‘Reset Distance’ limit been reached or exceeded?
- NO - Follow instructions in section 2 below
- YES - Follow ‘Reset Distance Counter’ instructions below
Reset Distance counter procedure
- Press and hold left instrument reset button for 5 seconds. ‘RESET’ will begin to flash on the LCD display.
- To reset distance the left hand button should be pressed before the ‘RESET’ message has flashed 5 times
- The LCD will display ‘END SIA’. Switch ignition off
2) Procedure to check/reset service status – Date counter
- Press left instrument panel reset button once
- The LCD will display ‘RESET SIA’ followed by the service due date.
- Has the ‘Reset Date limit been reached or exceeded?
- NO – Press the left instrument button once. The LCD will display ‘END SIA’ to indicate the service interval check/reset procedure has been cancelled.
- YES - Follow ‘Reset Date Counter’ instructions below
Reset Date counter procedure
- Press and hold left instrument reset button for 5 seconds. ‘RESET’ will begin to flash on the LCD display.
- To reset distance the left hand button should be pressed before the ‘RESET’ message has flashed 5 times
- The LCD will display ‘END SIA’. Switch ignition off
