You do not have permission to edit this page, for the following reason:

You can view and copy the source of this page:

==Resetting the Oil Service or Service Interval Message 02-<05== Ignition key must be “off” *Press and hold the trip odometer button in the instrument cluster (left button), and turn the ignition key to the first position (KLR). *Keep the button pressed for approximately 5 seconds until one of the following words appear in the display: “OIL SERVICE, or “INSPECTION”, with “reset”. *Release the reset button and press and hold it again until “reset” begins to flash. *While the display is flashing, press the left button briefly to reset the service interval. *After the display has shown the new interval, the following will appear: “END SIA”. ===[[Service Reset Detailed Instructions]]=== ==Resetting ALL Defect Codes== Ignition key must be “off” Press and hold the Check Control button in the instrument cluster (RIGHT button), and turn the ignition key to the first position (KLR). * You will first see "Check Control OK", some seconds later you will see "Test Nr.01" * Push the left button on the instrument cluster to see the car's identification number. Add the 5 digits (not 6) together and write down that number, you will need it for unlocking all the functions. Example: A123457 will lead to 2+3+4+5+7 = 21 * Push the right button until you see "Test Nr.19" * Push left button until you see the number that is equal to the one you calculated above * Push right button again * Using the left button select 21. Reset all defect codes * Press the Right button to select. ==More Instrument Cluster Tests== Ignition key must be “off”. • Press and hold the Check Control button in the instrument cluster (RIGHT button), and turn the ignition key to the first position (KLR). * You will first see "Check Control OK", some seconds later you will see "Test Nr.01" * Push the left button on the instrument cluster to see the car's identification number. Add the 5 digits (not 6) together and write down that number, you will need it for unlocking all the functions. Example: A123457 will lead to 2+3+4+5+7 = 21 * Push the right button until you see "Test Nr.19" * Push left button until you see the number that is equal to the one you calculated above * Push right button again 1. Display Car's identification number, HW/SW version, construction date 2. instrument cluster self test. Will light up all lights and run all guages 3. Current consumption (liters/hour) 4. Average consumption (liters/100 km) 5. Current range 6. Remaining fuel in tank. Three sets of numbers: A/B/C. C=total amount. 7. Engine RPM / Coolant Temp (C) 8. Current Speed (kph) 9. System voltage at Term. "R" (Battery Voltage) 10. Country/Language (UK, US, Spa, Ger, Jap, etc.) 11. Units am/pm 12. Average Speed 13. ETA 14. Date of Software Mask 15. Production Diagnosis 16. "" 17. Display Vehicle Specific Data 18. Alarm Changeover (cont. vs. intermittent OBC chime) 19. Lock/Unlock 20. Correction factor for fuel consumption (nicht ändern!) 21. Reset all defect codes ==Hidden Service Radio Menu== :Using the Left button on the navigation turn radio off :Turn Radio on and immediately press and hold the Select button for 12 seconds :Using the < > buttons navigate the options. You can change some options using the 1-6 buttons :GAL Speed sensitive volume control :TP Volume Navigation Audio and traffic patrol volume (euro option) :Radio Tune Auto Manual :To save turn radio off

Return to Secret Codes.