Car PC Project |
 |
| TITLE |
+ |
- |
| FILE NAME |
+ |
- |
| DATE |
+ |
- |
|
|
45 - Pushing in the clip on the pin to release on the upper catch – 138 views
|
|
46 - PIn 17 removed – 133 views
|
|
47 - Resler Interface "NTSC" wire soldered onto Pin 17 – 128 viewsI tried to open up the wire clamp on the pin connector but decided in the end to solder it on
|
|
48 - Pin 17 refitted – 126 viewsIts a tight fit with two wires, so pare back the wire casing a bit, or ease it in with a tiny screwdriver
|
|
49 - "Video IN" pins removed from slots 2 & 11 – 129 viewsThe "Video IN" cable on the AV loom was not being used, so I didn\'t have to find extra pins. I simply removed the pins from 2 & 11 and replaced then in 13 & 14 the pin assignments for the reverse camera
|
|
50 - "Video IN" pins going into 13 (+) and 14(-) – 130 views
|
|
51 - All connections made – 126 viewsSee Resler USB connector and Video cable now connected
|
|
52 - Nearly ready! – 157 viewsReconnecting the AV loom is a reversal of the removal process. I have tied up the Video input cable and Relser wires until I fit the PC
|
|
54 - Connecting up the other 3 wires from the Resler iBus interface – 123 views
|
|
55 - All the gubbins! – 125 views
|
|
56 - PC and Front Screen up and running – 124 views
|
|
57 - All 3 screens running a video – 126 views
|
|
|
|
