Having a quick EBay surf this morning and found this:

http://www.ebay.co.uk/itm/RANGE-ROVER-LAND...500wt_1029

There were 4 but now there's 3 -£199 + £10p+p

And now there are only 2.....

Cheers nubbin.. Previously..
Vogue SE TD6
Defender 90 2.4
Defender 110 TD5
Vogue 3.5 EFI

Is that for the touchscreen models? 2006 Mercedes CLS
1991 Retro-style Mini
But really finding it hard to fight the urge for a S/C...

Hmmm doesn't look anything like my 02 analog tuner: different connectors and two antenna connectors not one? Some rewiring required? .
Experience is the only genuine knowledge, but as time passes, I have forgotten more than I can remember
Volvo V70 P2 2006 2.4 Petrol 170bhp Estate SE
MG Midget Mk1 1962

Previous: L322 Range Rover TDV8 3.6 2008; L322 Range Rover TD6 3.0 2002; P38A Range Rover V8 1999

I think it's different for the MOST ones Joe but still a good find!! FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.

It's just that the ebay blurb says they are for 02 - 12 FFRR & Disco ? .
Experience is the only genuine knowledge, but as time passes, I have forgotten more than I can remember
Volvo V70 P2 2006 2.4 Petrol 170bhp Estate SE
MG Midget Mk1 1962

Previous: L322 Range Rover TDV8 3.6 2008; L322 Range Rover TD6 3.0 2002; P38A Range Rover V8 1999

These units are for touch screen only.

Non touch screen need the BMW units.

Yip, I noticed the 02 - 12 as well. I bought one this morning. I'll contact him and tell him his wording is wrong. Previously..
Vogue SE TD6
Defender 90 2.4
Defender 110 TD5
Vogue 3.5 EFI

They've all gone now

I can't wait to get this unit into the car, as well as replacing the Bluetooth module with a new D4 unit courtesy of wiggs. Also waiting for a reversing camera to arrive from Hong Kong and that'll be the AV stuff sorted! Last change on the list is 2010 facelift which should be done in the next few Weeks if the weather warms up

Nubbin

How do you plan on wiring in the reverse cam?

They cannot be Freeview as you are paying £199 for them LOL

on another note if they are new why does the pic show one with greasy paw prints on it Far to many gone...

The camera comes with a 5m phono cable which I want to run to the back of the front screen where there's 3 SMB sockets for the various camera/tv inputs, using one of these -

http://www.disco3.co.uk/shop/images/uploads/DSC04104_800.jpg
Then I hope to use the hidden menu 753 trick to enable the camera.hopefully that will work!

you'll need to activate the camera via the ccf menu...autologic or faultmate can do this ... ... - .- -.




Y. O. L. O.
.

As Scarey says you need to get the ccf changed.

I have all the bits ready to install a camera, but i will need to find someone local with a faultmate.

Unless there is something that can be done using the 753 screen????????