Home > Maintenance & Mods (L322) > Fitting 2010 Vents to earlier models NOW SORTED |
|
|
Googsy Member Since: 02 Jun 2011 Location: Where men are men and sheep are nervous. Posts: 2947 |
Chaps
|
||
11th Jan 2012 1:43pm |
|
JOKER Member Since: 11 Sep 2008 Location: Sconnie Botland Posts: 15876 |
The holes on the actual vents allow for a slight bit of movement , if for instance you think the vent is too far in when tightening up , just slightly pull the vent forward beforehand ….
|
||
11th Jan 2012 1:59pm |
|
Googsy Member Since: 02 Jun 2011 Location: Where men are men and sheep are nervous. Posts: 2947 |
Yes I saw that look very tasty. They just did not want to fit with the black plastic section fitted.Thanks I think your spot on and I had thought that prior to walking a few feet for the first time admiration glance It would be nice if the black plastic had of fitted as it looks better when you peer through the vents. Present :2008 TDV8 HSE
|
||
11th Jan 2012 2:42pm |
|
Googsy Member Since: 02 Jun 2011 Location: Where men are men and sheep are nervous. Posts: 2947 |
Thanks guys after going back out and removing again I fitted the black plastic backing piece and with a bit of jiggling it does fit with the backing piece All now fixed. Just looking at them Mick I think the colour coded version may be nicer but its done now and SWMBO will kill me if I donate more cash in the near future to my FFRR. Just the Super Charger 20's to get and im done Present :2008 TDV8 HSE
|
||
11th Jan 2012 3:47pm |
|
JOKER Member Since: 11 Sep 2008 Location: Sconnie Botland Posts: 15876 |
Thought you were after the 2010 design Alloys ….. |
||
11th Jan 2012 4:37pm |
|
Googsy Member Since: 02 Jun 2011 Location: Where men are men and sheep are nervous. Posts: 2947 |
I think its the type 7 same as yours im after but will wait until my tyres are well worn . Present :2008 TDV8 HSE
|
||
11th Jan 2012 4:58pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis