Hi,

Has anyone any experience with replacing a typically failed steering rack on a L405 with a used steering rack from another L405 and solved the coding issue, or know of somewhere in the UK that can assist.

Thanks

I've got this problem right now.

My coding expert has tried to recode a used motor and module on my old rack and LR have told him:
1. That the module needs to new/wiped before and can't just be recoded
2. That the module and motor is also coded to the rack itself and cannot be treated as a separate component (I don't understand how an electrical component can be 'coded' to a mechanical component but hey ho)
3. LR's solution is to buy a new module at £2.5k + VAT

So I'm going to remove the original rack and sent it together with the original motor/module to be reconditioned for £900 and hope this solves the problem.

Please keep us updated and a link to the company you are using would be good...

Cheers  Pete
I now have permission from the boss to use Y.O.L.O. Enjoy life
__________________________________________________
2014 L405 Autobiography SDV8 4.4 Loire Blue Ebony interior
2011 L322 Vogue SE 4.4 TDV8 Baltic Blue. Sold
2012 L322 Autobiography 5.0 Supercharged Ipanema Sand Sold
2002 L322 Vogue 4.4 V8 Epson Green (Fatty Offroader) Sold
-Click for Project Fatty off roader-

What went wrong with rack in the first place ? V8 or else ...

Seen a few now with snapped bolts holding the motor to the rack...

I’m in the same boat ,hoping that Patrick from gap tool will be able to help he did say tho they can be tricky to do

The power steering just stopped working - quite an interesting experience when you're haring down the fast lane of a motorway...

At first steering could be reset after restarting the car but this only stopped working after a couple of days. The dash initially indicated a fault but then even the warning messages disappeared.

My local maintenance guy said that the steering module had stopped communicating.

A used replacement motor and module re-established communication but couldn't be coded to the car. I consulted two coding specialists who confirmed that this was the case.

Rack and motor c/w. module now being sent to Western Power Steering in Bristol for reconditioning which includes re-setting the module so that it can be re-coded to the car.

Seems bonkers to lock down a steering rack setup to be car specific. V8 or else ...

This is what mine looks like ….looks l8ke it has been going for a long time before I got the car crazy that this happens

Click image to enlarge

That looks fixable though. The racks unbolt and you can replace the belts.

I managed to extract a sheared bolt from my beemer which has a similar setup and replaced with steel bolts. V8 or else ...