Hi. Just wondering if anyone has had this issues where fault code are they when car engine is cold but when it starts to get upto temperature they dissappear.

Click image to enlarge

Click image to enlarge

It’s entirely possible a sensor could come back into life / spec when warmed up. 2012 TDV8 Vogue (L322)

Yes it's just annoying. I think I will replace the map sensors and see if that helps the issue out

Is yours a 4.4 or 3.6? If the former there is only one MAP sensor on the top of the 'donut' shaped intake under the engine cover. Worth removing in and cleaning out the soot which rapidly builds up and checking the wiring / connector for electical continuity. 2012 TDV8 Vogue (L322)

Mine a 2010 3.6. So I think there is 2 on the top of the engine

Even easier then - swop them around and see if the fault follows to bank A 2012 TDV8 Vogue (L322)

Yes good idea. When I get home and try and let you know. What ramge rover do you have?

Hover your cursor over the little picture of a Rangie under the persons name in the left side box. It will show you what car they have, if they have filled in their profile... Pete
I now have permission from the boss to use Y.O.L.O. Enjoy life
__________________________________________________
2014 L405 Autobiography SDV8 4.4 Loire Blue Ebony interior
2011 L322 Vogue SE 4.4 TDV8 Baltic Blue. Sold
2012 L322 Autobiography 5.0 Supercharged Ipanema Sand Sold
2002 L322 Vogue 4.4 V8 Epson Green (Fatty Offroader) Sold
-Click for Project Fatty off roader-