hi guys

My driver side deployable side step wasn't retracting all the way then when I was lubing them (spray) I opened the drivers door to extend them and I heard a real thump/crack sound.

Now it is not retracting and/or floppy. Meaning I can move it up and down with my hand. The pass side does not d that...

Motor gone? Gears?
Any tips very welcome.

. Cheers, Greg
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
2011 Vogue SE 4.4 with lots of toys in Stornaway

looking a bit more of this firstly I've read most issues lie with (lack of) lubrication. In my case that may have been the cause of the crack sound but not now.

I can hear the motor whirring, and it sometimes pulls the step up a bit, but not all the way. And it's very floppy as I mentioned.

I think one of the drive gears gave way, does anyone know if they can be repaired?
There does not seem to be anything in the workshop manual. I can only find the fitting instructions pdf.

Any help appreciated.

. Cheers, Greg
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
2011 Vogue SE 4.4 with lots of toys in Stornaway

Frustrating, sorry to hear. Have deployables on mine. Lubricate every few months. Sounds like some of the gears may have snapped on the motor, so at it turns it catches the step.

Sure others on here may have some other ideas.

Would you look to repair or remove the steps completely.
Good luck 2012 4.4 TDV8 AB Sumatara Black with Ivory / Jet interior

definitely keeping them, just searching for part numbers now...
. Cheers, Greg
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
2011 Vogue SE 4.4 with lots of toys in Stornaway

Wedge key may have broken/fallen out.

what's a wedge key pls?
do you have a part no?

. Cheers, Greg
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
2011 Vogue SE 4.4 with lots of toys in Stornaway

Small metal wedge shape in the bracket that moves, have a look at the bracket that still works and you may see the part, it is held in place with a small bolt, no part number, but look on line at industrial engineer supply companies they may have some.

thanks DPM, sounds like you had a similar issue?
did you get any pics by any chance?

. Cheers, Greg
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
2011 Vogue SE 4.4 with lots of toys in Stornaway