Advertise on fullfatrr.com »

  • You are currently viewing fullfatrr.com as a guest - Register to take part or Log In
Home > Technical (L322) > Faults using IDD Tool G3 with 2005 L322 HSE - 'real' ones?
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
invisible999



Member Since: 14 Jan 2024
Location: Reno, NV
Posts: 56
United States 2005 Range Rover HSE 4.4 V8 Chawton White
Faults using IDD Tool G3 with 2005 L322 HSE - 'real' ones?

After getting and registering my IDD Tool I did code reading and it came up with following

Using IIDTool BT V4.0 B3998

AAM-Audio Amplifier
B1A03-13 (2F) Speaker 3 circuit - General electrical failure - circuit open
( at 2141416 mi )
- Test Failed
- Test Failed This Monitoring Cycle
- Confirmed
- Test Failed Since Last Clear

ACM-Audio System
U1A03-62 (2B) Vehicle configuration parameter - Algorithm based failure - signal compare failure
( at 2141416 mi )
- Test Failed
- Test Failed This Monitoring Cycle
- Confirmed
- Test Failed Since Last Clear
U2003-86 (28) Fibre optic communication bus - Bus signal/message failure - signal is invalid
( at 2141416 mi )
- Confirmed
- Test Failed Since Last Clear

ATC-Heat / Cool
0x30 Air quality sensor line fault

CDP-CD Player
U1A03-62 (50) Vehicle configuration parameter - Algorithm based failure - signal compare failure
- Test Not Completed
- Test Not Completed This Monitoring Cycle

ECM-Engine (ME7.2)
0x43E P0000-Multiple misfire fault
0x435 P0000-Misfire detected cylinder 8

FEM-Navigation
B110E-25 (40) Tailgate double locking motor - General signal failure - signal shape/waveform failure
( at 0 mi )
- Test Not Completed This Monitoring Cycle
B110F-25 (40) Heart beat sensor - General signal failure - signal shape/waveform failure
- Test Not Completed This Monitoring Cycle
B1110-25 (40) Air suspension delay power - General signal failure - signal shape/waveform failure
- Test Not Completed This Monitoring Cycle
B1A89-13 (40) Satellite antenna - General electrical failure - circuit open
- Test Not Completed This Monitoring Cycle
B1D62-87 (40) Sub-module 'B' - Bus signal/message failure - missing a message
- Test Not Completed This Monitoring Cycle
B1D62-49 (40) Sub-module 'B' - System internal failure - internal electronic failure
- Test Not Completed This Monitoring Cycle

IP-Instrument Pack
0xBD EBV function fault received from ABS ECU

PATS-AntiTheft
0x33 Key 3 - Random code tolerance increased


Before doing ANYTHING, I have couple of questions.

First - which of these codes are 'real'? Because I was reading that this error - BV function fault received from ABS ECU should be ignored.

Secondly - what the heck with 2141416 mi - 2.1 million! miles? Where this came from

Thirdly - how do I isolate/figure out what is going on? I also have ALL COMMS III and nothing except these misfire errors show up there:

----------------------------------------------------------------
MKIII Communications Performed by RSWsolutions - All Comms Software.
L322 Air Suspension Module Query Results: Performed on 7/28/2024 7:56:28 PM
.!
Air Suspension System Fault Reading Complete...

0x32   0x0032   CAN bus Fault.   

----------------------------------------------------------------



----------------------------------------------------------------
MKIII Communications Performed by RSWsolutions - All Comms Software.
L322 ECM_M62 Module Query Results: Performed on 7/28/2024 7:56:49 PM
!
Petrol Engine Management Fault Reading Complete...

0x135   P0308   Misfire detected cylinder 8.   
0x136   P0306   Misfire detected cylinder 6.   
0x13E   P1300   Multiple misfire fault.   
0x19A   P0277   Cylinder 6 injection circuit fault.   

----------------------------------------------------------------
MKIII Communications Performed by RSWsolutions - All Comms Software.
L322 Instrument Cluster Module Query Results: Performed on 7/28/2024 8:02:10 PM
!
Instrument Panel Module Fault Reading Complete...

0xBD   0x00BD   EBV function fault received from ABS ECU.   

Post #699579 5th Sep 2024 9:03pm
View user's profile Send private message View poster's gallery Reply with quote
invisible999



Member Since: 14 Jan 2024
Location: Reno, NV
Posts: 56
United States 2005 Range Rover HSE 4.4 V8 Chawton White

Update on this matter. Apparently the plug right above the DVD reader where Navigadion DVD is was unplugged. I plugged it back, cleared errors and now only see following ones after clearing errors

ACM-Audio System
U1A03-62 (2B) Vehicle configuration parameter - [b]Algorithm based failure[/b] - signal compare failure
( at 2141416 mi )
Test Failed
Test Failed This Monitoring Cycle
Confirmed
Test Failed Since Last Clear
IP-Instrument Pack
0xBD EBV function fault received from ABS ECU
ATC-Heat / Cool
0x30 Air quality sensor line fault


The first one is still strange, with remaining 2.1 millon miles. But what is the above bolded - anyone knows?

The second one should be ignored based on my search.

Which leaves us with the third one. I looked at sensor and it is the one on photo below. I tried to clean it - it was full with small dust type thing on the left intake side, put it back but no changes.



What are replacement oem/aftermarket part numbers for this?
Post #699649 6th Sep 2024 10:29pm
View user's profile Send private message View poster's gallery Reply with quote
pcourtney



Member Since: 14 Jan 2020
Location: Stansted
Posts: 900
England 2011 Range Rover Vogue 4.4 V8 Sumatra Black

perhaps a little searching on the forum first would be a good idea Sir

https://www.fullfatrr.com/forum/topic28100.html?highlight=0x30
Post #699663 7th Sep 2024 8:23am
View user's profile Send private message View poster's gallery Reply with quote
invisible999



Member Since: 14 Jan 2024
Location: Reno, NV
Posts: 56
United States 2005 Range Rover HSE 4.4 V8 Chawton White

Question - if the part number is the same 6411-8 391 470 will it be interchangeble?
I ordered this item off ebay
https://www.ebay.com/itm/266921777858
Post #699725 7th Sep 2024 9:05pm
View user's profile Send private message View poster's gallery Reply with quote
pcourtney



Member Since: 14 Jan 2020
Location: Stansted
Posts: 900
England 2011 Range Rover Vogue 4.4 V8 Sumatra Black

I don't think so, you want the part that comes from the BMW E53 ( which was the BMW X5 series and the years from 1999 to 2006 )

but you might be OK, after all it is a simple part sold in lots of BMW's of the time - good luck Smile
Post #699731 7th Sep 2024 10:04pm
View user's profile Send private message View poster's gallery Reply with quote
invisible999



Member Since: 14 Jan 2024
Location: Reno, NV
Posts: 56
United States 2005 Range Rover HSE 4.4 V8 Chawton White

Update on this matter - bought this item on Ebay
https://www.ebay.com/itm/266921777858
After the replacement - I don't see error on GAP ID Tool any more.
Post #700136 15th Sep 2024 6:45am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
fullfatrr.com RSS Feed - All Forums


Switch to Mobile site