Hello all! Quick question.

Have some brake squeaking at low speeds, and during release coming off full stop. Goes away at higher speeds and with pumping the brakes. Read that its common and not an issue, but I recently bought this vehicle used and while the rotors and pads are brand new, figured I'd run through the front calipers and clean em up + reseal (maybe paint them as well).

Calipers should be 6 pot brembos I believe (From what I read they're standard on the 2011 SC models), I know the diameters are 36. 38. and 40mm. But what about height

Any noteworthy piston manufacturers?


Was planning on using this seal kit, if anyone has a recommendation for a better kit lmk.

https://www.zeckhausen.com/catalog/product...s_id=26174

Pads have plenty of life but was thinking about buying new ones as well to see if that helped with the noises. Would appreciate any recs as well on that end!

Thanks!!

Also saw this kit that comes w/ pistons, just always been wary of buying off of ebay!

https://www.ebay.com/itm/334107285814?_nkw...BMnoHa7rZk

I fitted Powerstop low dust pads from Rock Auto on my S/C, transformed the brakes, noise and dust...  Pete
__________________________________________________
2014 L405 Autobiography SDV8 4.4 Loire Blue Ebony interior
2011 L322 Vogue SE 4.4 TDV8 Baltic Blue. Parchment over Navy Interior. Sold
2012 L322 Autobiography 5.0 Supercharged Ipanema Sand, Jet Interior. Sold
2002 L322 Vogue 4.4 V8 Epson Green, Ivory over Aspen Interior (Fatty Offroader) Sold
-Click for Project Fatty off roader-