Hi Guys,

I recently had an idler pulley fail which grenaded the belt and required me to replace quite a few parts. However, upon re-assembly I've come across a thing hooked tube that seems to run up along one of the intake pipes towards the airbox but cannot see anything this would connect to.

Any help would be appreciated as when the belt went, quite a few things got knocked out of place and so am not sure if i've even routed it correctly.

It's a 2007 3.6tdv8 Autobiography and the hoses are on the left hand side of the vehicle next to the air box. (Right hand side when looking at it from the front.)

Click image to enlarge

Click image to enlarge

Click image to enlarge

It looks to be a breather pipe and not meant to be connected to anything in the engine bay….  ______________________________
Simon
______________________________

Range Rover Classic 3.5 efi - Gone
Range Rover Classic 3.9 efi - Gone
Range Rover Classic 4.2 LSE - Sadly gone
Land Rover 110 3.5 - Gone
Range Rover P38a 4.0 SE - Pleased it's gone
Range Rover P38a 2.5 DHSE - Just sold
Range Rover L322 4.4 v8 Petrol - Current

Thanks, I thought it might have been but couldn't find any pictures online and the belt had knocked other hoses off so wanted to double check

👍🏻 ______________________________
Simon
______________________________

Range Rover Classic 3.5 efi - Gone
Range Rover Classic 3.9 efi - Gone
Range Rover Classic 4.2 LSE - Sadly gone
Land Rover 110 3.5 - Gone
Range Rover P38a 4.0 SE - Pleased it's gone
Range Rover P38a 2.5 DHSE - Just sold
Range Rover L322 4.4 v8 Petrol - Current

Same appearance as diff and gearbox breathers. Ron B. VK2OTC
2003 L322 V8 Auto
2007 Yamaha XJR1300
Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA