Hello All
My new to me 5.0 s/c has developed a P0302 error. Cylinder 2 misfire. It appears after 5-10 mins as a pending error, and will turn on the EML after another 10 mins or so.
I fitted new spark plugs - error still P0302.
I swapped cyl 2 coil pack with cyl 4. error still P0302.
At this point, I looked at fuel trims, and they were -13 and -18, so I suspected an injector.
So I fitted a new injector into cyl 2, and guess what, the P0302 is still there along with the same double digit fuel trims.
So, to confirm, cyl 2 is passenger side, at the front of the engine.
The car drove 100 miles home with no issues or EML. Since then it has been started for a few seconds or minutes only each time as it is shunted around as I fitted new brakes, oil change etc. I have allowed it to fully warm up on a number of occasions.
What else do I check? Compression test? But why was it fine beforehand and now this? Anyone any ideas? 2010 5.0 SC Autobiography Overfinch in Bentley Silk White pearlescent, 22" Overfinch wheels with 285/35x22 tyres
|