fullfatrr.com - View topic - L405 jack adaptor

Advertise on fullfatrr.com »

Forum · Gallery · Wiki · Shop · Sponsors

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Mods (L405) > L405 jack adaptor

Page 1 of 2

Print this entire topic ·

LT

Member Since: 13 Mar 2017
Location: South West
Posts: 396

2017 Range Rover Autobiography SDV8 Carpathian Grey

L405 jack adaptor

I have both a Clarke trolley jack and also a Mercedes Sprinter bottle jack with adaptors for the Discovery3/4.

Can I buy a suitable adaptor for the L405?

A forum search only revealed one L405 thread, which has a link but is no longer working.

22nd Feb 2021 4:56pm

Alistair

Member Since: 11 Feb 2011
Location: Peterborough / Bordeaux / Andorra
Posts: 7921

2013 Range Rover Vogue SE SDV8 Santorini Black

Not heard of an adapter for the L405.

If you have deployable steps, the jacking point is on those & quite low - works well with a trolly jack, but I haven't found a bottle jack to fit.

Without the steps the jacking post is higher - but that's about all I know as I have steps....

23rd Feb 2021 9:25am

LT

Member Since: 13 Mar 2017
Location: South West
Posts: 396

Just reviving this on the off chance that someone has found an adaptor for the L405.

6th Jun 2021 6:50pm

Davlyn

Member Since: 21 Nov 2011
Location: Sladesbridge, Cornwall
Posts: 234

2012 Range Rover Westminster 4.4 V8 Baltic Blue

following.

25th Jun 2021 2:02pm

Alistair

Member Since: 11 Feb 2011
Location: Peterborough / Bordeaux / Andorra
Posts: 7921

Does the jacking point protrude ? With deployable steps, there's a bit that hangs down which is the new jamming point as the old one is covered by the step

This works great with a trolley jack with no other pad, but not so good for a bottle as it would need to be quite short but with a really high lift and those seem to be very expensive.

I did get as far as buying a bottle jack topper thing from eBay, but then realised I had no idea how I would attach it

it's 4cm in diameter and at least it was only a fiver so not too much buyers remorse

25th Jun 2021 2:30pm

LT

Member Since: 13 Mar 2017
Location: South West
Posts: 396

Yes, the jacking points do protrude (no side steps) but not as prominently as in your photo.

I have both a trolley jack and bottle jack, I'm more keen for an adapter pad for the trolley jack though.

25th Jun 2021 3:36pm

knwatkins

Member Since: 11 Sep 2020
Location: Poole, Dorset
Posts: 768

2014 Range Rover Vogue SE SDV8 Corris Grey

A block of wood works fine. I haven't seen any specific adapters. Kev

2014 L405 RR Vogue SE 4.4 SDV8 in Corris Grey
2010 L320 RRS HSE 3.0 TDV6 in Stornoway Grey

25th Jun 2021 5:15pm

nbunney

Member Since: 10 Aug 2008
Location: Lancashire
Posts: 2031

LT wrote:
Yes, the jacking points do protrude (no side steps) but not as prominently as in your photo.

I have both a trolley jack and bottle jack, I'm more keen for an adapter pad for the trolley jack though.

I have asked the same, but never got an answer

28th Jun 2021 6:20am

LT

Member Since: 13 Mar 2017
Location: South West
Posts: 396

Thread revival, just on the off chance.

6th Nov 2021 9:05pm

discovery

Member Since: 29 Jan 2024
Location: hampshire
Posts: 14

Hi LT, I too am long time disco owner with adapter. On disco3 site I am known as Stick, we have exchanged the odd message over the years. I am looking at getting ffrr (with some sadness). What have you ended up using for an adapter?

2nd Feb 2024 6:54am

RDR

Member Since: 05 Sep 2014
Location: Derbyshire
Posts: 278

i think you just need a standard V adapter for the L405?

its not like the D3/4 with the holes, I used to make and sell the metal adapters for forum members over on the Disco3 sister site MY23 PHEV HSE
MY19 Disco 5 HSE - gone
My16 Disco 4 HSE LUXURY - gone
My12 Disco 4 HSE - gone
MY05 Disco 3 S - gone but not forgotten

2nd Feb 2024 8:54am

Gremlin500

Member Since: 11 Mar 2022
Location: Newcastle, UK
Posts: 1417

There are hockey-puck heavy rubber adapters about 4” diameter on eBay with a slot cut in to fit the rib in the RR deplorable step jacking points.
Mine are a bit chewed, must get a couple more…… “If it ain’t broke, don’t fix it” -where’s the fun in that?

2nd Feb 2024 11:31am

Gremlin500

Member Since: 11 Mar 2022
Location: Newcastle, UK
Posts: 1417

THESE:

https://www.ebay.co.uk/itm/274452706791?mk...media=COPY

“If it ain’t broke, don’t fix it” -where’s the fun in that?

2nd Feb 2024 11:34am

discovery

Member Since: 29 Jan 2024
Location: hampshire
Posts: 14

Thanks, ordered

2nd Feb 2024 4:16pm

discovery

Member Since: 29 Jan 2024
Location: hampshire
Posts: 14

Quote:
I used to make and sell the metal adapters for forum members

Excellent piece of kit - 14 years of good use.

2nd Feb 2024 4:18pm

Page 1 of 2

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum