Home > Technical (L322) > Adaptive Dynamic Fault L322. |
|
|
JST Member Since: 12 Dec 2013 Location: Somerset Posts: 490 |
Air suspension working as it should? Cheers
|
||
8th Jul 2019 6:56pm |
|
Mikem Member Since: 13 Jan 2019 Location: Kent Posts: 48 |
Hi thanks for your reply, yes all suspension working fine |
||
8th Jul 2019 7:13pm |
|
Andy B Member Since: 03 Apr 2012 Location: West Malling Posts: 1223 |
Hi Mike, had this on my L322 S/C and fixed it with the wiring kit (x2). Assume it's the Adaptive Dynamics fault, not Active Dynamic. Happy to pop round and take a look depending on where you are in Kent!
|
||
8th Jul 2019 7:44pm |
|
Mikem Member Since: 13 Jan 2019 Location: Kent Posts: 48 |
Hi Andy yes it’s the adaptive dynamic fault, I am down in Folkestone many thanks for the reply |
||
8th Jul 2019 8:08pm |
|
Andy B Member Since: 03 Apr 2012 Location: West Malling Posts: 1223 |
Ha, my home town and where I was dragged up (Dolphins Road)! Can arrange a visit in the next couple of weeks if you need some help I am popping down to visit my Dad in Seabrook in the next couple of weeks. PM me SDV8 AB MY 2019
|
||
8th Jul 2019 8:16pm |
|
Mikem Member Since: 13 Jan 2019 Location: Kent Posts: 48 |
Will do many thanks for your reply
|
||
8th Jul 2019 8:19pm |
|
Mikem Member Since: 13 Jan 2019 Location: Kent Posts: 48 |
Forgot to put i am only about 5 mins from Seabrook |
||
8th Jul 2019 8:20pm |
|
Mikem Member Since: 13 Jan 2019 Location: Kent Posts: 48 |
Checked the connections yesterday on the 2 new wiring repair kits and all seemed ok but the warning light is still coming on could there be another fault has anyone else experienced this |
||
14th Jul 2019 9:55am |
|
RJH Member Since: 22 Mar 2015 Location: Coventy Posts: 398 |
Have you confirmed it was definitely the fronts with a iidTool or similar?
|
||
14th Jul 2019 2:43pm |
|
Mikem Member Since: 13 Jan 2019 Location: Kent Posts: 48 |
Had a broken wire on the front so replaced both sides going to get into somewhere that can plug it in and hopefully trace the fault. Thanks for the reply |
||
14th Jul 2019 3:27pm |
|
Mikem Member Since: 13 Jan 2019 Location: Kent Posts: 48 |
What did you have to replace on the rear of the car |
||
14th Jul 2019 3:28pm |
|
RJH Member Since: 22 Mar 2015 Location: Coventy Posts: 398 |
I had to replace the wiring & connector.
|
||
14th Jul 2019 8:46pm |
|
Mikem Member Since: 13 Jan 2019 Location: Kent Posts: 48 |
Cheers rob will check tomorrow i have a spare repair kit if required |
||
14th Jul 2019 8:52pm |
|
Mikem Member Since: 13 Jan 2019 Location: Kent Posts: 48 |
Checked the rears tonight no broken wires at the plugs so i think next thing is to get it plugged in and see what comes up |
||
15th Jul 2019 5:01pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis