Hi everyone,
I know this may of been covered but I've spent a considerable amount of time searching but with no luck.

I have a coolant leak out the small pipe as it goes into the connector that has one other smaller hose and a bigger hose that goes to the intercooler.
I've ordered that whole piece which is fine, I can hopefully fix that once it arrives.
I just was just looking at the silicone hose next to this piece and thought maybe whilst I'm doing these hoses, I could change the ones next to it for silicone ones.
I think I've found the part number
https://parts.jaguarlandroverclassic.com/lr022663-tube-inlet.html

But I can't find anyone who makes the hoses in silicone, i thought BAS autos would but they only have the 3.6ltr ones.
Just wondering if anyone knows a good place to get some if they make any.
I do apologise in advance, this is my first Ranger Rover and want to take care of her and put some money into it.

Never heard of these failing on the 4.4 so no real point replacing them. The common hose fails on the 4.4 are teh 4 short couplings between the intakes and the 'donut' but if yours is a 2012 likley they are factroy fitted with the silicone updated part ( identified by white lettering) 2012 TDV8 Vogue (L322)

Thank you for that, maybe that's why I couldn't find any.
Hopefully the part I need arrives very soon then I'll check the 4 smaller hoses whilst I'm there!
Thank you again