I have a fault with my front drivers ride height sensor and ordered a replacement which arrived, but ordered one without the mounting bracket (foolish I know) and the Torx screws are very soft and shredding, so they aren't going anywhere!
So long story short, where can I get the replacement brackets from that is not going to be £236 from a dealer and will the older style fit as they seem to under a tenner each!
Many thanks in advance  2011 L322 Autobography - a lot of bells and some of the whistles...owner with no idea!

Older style bracket should fit. I ended up cutting the old height sensor away so I could grip the bolts and the captive end that was spinning. I then used a normal bolt to attach the new height sensor.

Was a right pain.

Didn’t realise you could get the bracket elsewhere…. I too got a daft price from the dealer for one.

I think there are some non OE height sensors that come with the bracket.

 2011 Range Rover Vogue SE 4.4 TDV8

Previous cars :
2003 Range Rover Vogue TD6
1999 Discovery Td5 ES
1995 BMW M5 3.8 6 speed
1992 Range Rover 3.9 Efi Vogue
1992 BMW M5 3.8
1988 BMW 735i SE
1989 Ford Sierra XR4x4 2.9i
1981 Ford Fiesta Supersport

aye was so frustrating that it was such an easy job to get it off and I was screwed by a 79p bolt that shredded!
Good idea on cutting the old sensor apart that may actually be easier than drilling out the bolt heads  2011 L322 Autobography - a lot of bells and some of the whistles...owner with no idea!

I used some hefty wire cutters on the black plastic. Then ended up using pliers on each end. There is a round collar that’s threaded and it just spins in the plastic.

I can’t remember what size the bolt was that I threaded into the new sensor.

 2011 Range Rover Vogue SE 4.4 TDV8

Previous cars :
2003 Range Rover Vogue TD6
1999 Discovery Td5 ES
1995 BMW M5 3.8 6 speed
1992 Range Rover 3.9 Efi Vogue
1992 BMW M5 3.8
1988 BMW 735i SE
1989 Ford Sierra XR4x4 2.9i
1981 Ford Fiesta Supersport

As above, there are plenty of non OEM height sensors complete with bracket for peanuts on the net, cheap way of getting a new bracket, then you have a spare sensor for emergency fitting. It seems that the bracket alone from LR is around £50 to 60

The bracket alone is over £200….. if I remember my quote right….

 2011 Range Rover Vogue SE 4.4 TDV8

Previous cars :
2003 Range Rover Vogue TD6
1999 Discovery Td5 ES
1995 BMW M5 3.8 6 speed
1992 Range Rover 3.9 Efi Vogue
1992 BMW M5 3.8
1988 BMW 735i SE
1989 Ford Sierra XR4x4 2.9i
1981 Ford Fiesta Supersport

Just looked at my old thread… seems it was £170 odd for the bracket. More than the OE height sensor….

https://www.fullfatrr.com/forum/topic55316.html

 2011 Range Rover Vogue SE 4.4 TDV8

Previous cars :
2003 Range Rover Vogue TD6
1999 Discovery Td5 ES
1995 BMW M5 3.8 6 speed
1992 Range Rover 3.9 Efi Vogue
1992 BMW M5 3.8
1988 BMW 735i SE
1989 Ford Sierra XR4x4 2.9i
1981 Ford Fiesta Supersport

Merchy wrote:

As above, there are plenty of non OEM height sensors complete with bracket for peanuts on the net, cheap way of getting a new bracket, then you have a spare sensor for emergency fitting. It seems that the bracket alone from LR is around £50 to 60

We meant just get a 3 pin non OE just for the bracket…. Assume brackets are the same….. can’t see why not…. Where are the brackets for less than a tenner? Might be useful for future.

I’d hack the old sensor off and use existing bracket.

 2011 Range Rover Vogue SE 4.4 TDV8

Previous cars :
2003 Range Rover Vogue TD6
1999 Discovery Td5 ES
1995 BMW M5 3.8 6 speed
1992 Range Rover 3.9 Efi Vogue
1992 BMW M5 3.8
1988 BMW 735i SE
1989 Ford Sierra XR4x4 2.9i
1981 Ford Fiesta Supersport

the old pre 2010 brackets are these https://www.lrparts.net/rqu000200-bracket-...-2009.html

The 2010 onwards are the same for both 3pin and 6pin but are a different part number from the pre 2009

Just in the process of dremeling off the old bolts! 2011 L322 Autobography - a lot of bells and some of the whistles...owner with no idea!