Morning All
Just a daft one really… I was filling the washer fluid the other day and after topping it up noticed the little rubber ‘overflow’ (??) pipe next to the filler unit was not in its holder and just hanging low and dripping fluid onto the ground, thought nothing of it and secured it properly in the holder.
Onto yesterday and today and now have no/little pressure behind the front jets, and practically no jet at all on the passenger side but fully working to the rear washer?? Have since topped the filler again to no avail.
Is it possible to airlock this system, and if so anyone know how to solve? Or where to begin to trace a blockage - which I don’t think possible as the strainer is still in the filler neck…

Thanks in advance… Cheers, Steven.

2012 Vogue 4.4 TDV8.

Is the washer pipe near the battery/bonnet crushing when you close the bonnet sometimes happened on mine just needs routed properly 2016 4.4 diesel

Yes! It bloody was… and it wasn’t noticeable with the bonnet up as nothing looked pinched or crushed. Just carefully tucked it al away from the side as I closed it over and viola!

Good man…  Cheers, Steven.

2012 Vogue 4.4 TDV8.