Gents I am doing the wheel arches so decided to overhaul rear suspension and do hub bushes and arms as well ass wheel bearings and thought I have never replaced the rear bags on the suspension in the 10 years I have owned it. Thinking I might just do them (on well over 200k ) Thoughts?

Sounds like a good move to replace the bags at the same time, especially at that mileage. With everything else off the vehicle it will be relatively easy to carry out the bag change.

My thoughts as well I cant recall anyone having a problem with the rears failing

I would think, all the suspension components will show wear after 200k...

To be fair Craig I replaced all the bushes including subframe at about 120k also the front bags and shocks and rear shocks wheel bearings and arms regularly its just the rear bags which I never replaced they look ok and no leaks but I am a preventative maintenance man as opposed to wait till it breaks so will just replace them
Island have Dunlop bags at 125 and Bilsteins at 150 anyone any recommendations ?

Dunlop gont have a good reputation as far as air suspension is concerned sir...

Thanks Craig

I am guessing Arnott's were original supplier

I put Bilstein from Island 4x4 on mine and have had no issues with them.

I’ve read of others saying they fail if you use off road height though. I use mine in off road height in the fields at crawling pace but not very often and have had no issues so far.

David. 2002 4.6 Vogue SE - Alveston Red with Lightstone Leather
2007 Range Rover Supercharged in Java Black with Ivory Leather
2012 Range Rover 5.0 SC Autobiography in Indus Silver with Jet/Ivory Interior
2012 Range Rover 4.4 TDV8 Autobiography in Baltic Blue with Sand Interior

Thanks David I think it is because the 3.6 of that era used a different shock and bag and they are too small for the diesel not sure but think that is it

Sandyt wrote:

I am guessing Arnott's were original supplier